Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D1292 – 15 (Reapproved 2021), officially titled “Standard Test Method for Odor in Water,” provides a standardized procedure for determining the odor intensity of water samples. This method is essential for evaluating water quality in effluents, drinking water, andā¦
ASTM D1293-18 standardizes the electrometric determination of pH in water using the glass electrode sensor. It outlines two test methods: the precise laboratory measurement (Test Method A) and the routine or continuous measurement (Test Method B), both based on theā¦
⚗️ Test Method Overview & Scope ASTM D129-18, also designated as British Standard 4454 and IP 61/99, defines the standard procedure for determining sulfur in petroleum products using a General High Pressure Decomposition Device. The method is specifically designed forā¦
🔬 Introduction and Scope of ASTM D1290-95 ASTM D1290-95 (Reapproved 2021) is the standard test method specifically designed for the determination of sediment in water-emulsion polishes using a centrifuge. The presence of sediment is widely regarded as detrimental to theā¦
🧪 Scope and Significance of D1291-17 ASTM D1291-17 (Reapproved 2023) is a standardized practice under the jurisdiction of Committee D19 on Water. It provides a reliable, empirical method for estimating the chlorine demand of water, a critical parameter for effectiveā¦
📐 Test Overview and Scope This standard, designated D1283-05 (Reapproved 2013), specifies a chemical method for determining the alkali-solubility of wool. It is applicable to wool in scoured fiber form, or as fiber from yarn, woven or nonwoven fabric. Theā¦
The ASTM D1287-11 (Reapproved 2020) standard provides a definitive methodology for measuring the pH of engine coolants and antirusts. This test method is critical for quality assurance in production and condition assessment in the field, despite clear limitations outlined inā¦
This standard guide defines the procedure for evaluating the corrosive effects of soak tank metal cleaners on metals under total immersion, specifically excluding aluminum and its alloys. Corrosion is assessed via quantitative measurement of weight change or qualitative visual inspection.ā¦
ASTM D1282-18 provides a standard test method for estimating the average fiber diameter of wool fibers using airflow resistance. It is applicable to non-medullated, carded wool and wool top, as well as grease and scoured wool prepared per Test Methodā¦
📐 Test Method Overview ASTM D1275-24, designated as 315/98, is a standard test method for detecting corrosive sulfur compounds in electrical insulating liquids. This method is essential for assessing the corrosivity of both new and in-service insulating liquids, which mayā¦