Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🔬 Test Overview and Scope The ASTM D1263-94 (Reapproved 2005)e1 test method, formally the Standard Test Method for Leakage Tendencies of Automotive Wheel Bearing Greases, provides a standardized laboratory procedure for differentiating between grease products with distinctly different leakage characteristics.…
This standard specification covers high-gravity glycerin with a minimum purity of 98.7 % by weight. It is intended for use in the manufacture of alkyd resins, synthetic resins, and similar industrial applications. The values stated in SI units are regarded…
🧪 Scope and Significance of ASTM D1258-05 ASTM D1258-05 outlines the standard test methods for the sampling and testing of High-Gravity Glycerin (1,2,3-propanetriol), also known as glycerol. These methods are specifically designed for evaluating the purity and quality of glycerin…
📐 Standard Overview and Method Selection ASTM D1259-06 (Reapproved 2018) provides standardized procedures for determining the nonvolatile content of resin solutions. This measurement is essential for coatings producers as it defines the total solids available for film formation and facilitates…
ASTM D1252−06 (Reapproved 2020) provides standardized procedures for determining the Chemical Oxygen Demand (COD) of water, also known as the Dichromate Oxygen Demand. These test methods are essential for characterizing the oxygen-consuming potential of organic and inorganic matter in water…
📐 Scope and Method Overview ASTM D1253-14 (Reapproved 2021) specifies the definitive procedure for determining residual chlorine in water by direct amperometric titration. This test method utilizes phenylarsine oxide (PAO) as the standard titrant and is designed to be highly…
📐 Overview of ASTM D1250-04 ASTM D1250-04, designated as part of the API Manual of Petroleum Measurement Standards Chapter 11, Section 1, provides comprehensive temperature and pressure volume correction factors for generalized crude oils, refined products, and lubricating oils. This…
ASTM D 1251 – 94 provides a rigorous standardized procedure for measuring the water vapor permeability of finished packages. This “Cycle Method” subjects packages to repeated extremes of temperature and relative humidity, making it ideal for evaluating shelf-size packages destined…
ASTM D1246−16 outlines a potentiometric test method for measuring bromide ion in water, ground water, and drinking water. The method employs a bromide ion-selective electrode and a reference electrode, with measurements taken using a pH meter or selective ion meter.…
📐 Scope and Material Classification ASTM D1248-16, originally approved in 1952 with the current edition published in December 2016, provides a specification for identifying polyethylene plastics extrusion materials intended for wire and cable applications. The standard establishes a comprehensive classification…