Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D1310-14 (Reapproved 2021) specifies a precise laboratory procedure for determining the flash point and fire point of liquids using the Tag Open-Cup apparatus. This test method is fundamental for the safety classification and quality control of liquids, including solvents,ā¦
📐 Overview and Scope of D1305-16 ASTM D1305-16 (Reapproved 2022) establishes the standard specification for electrical grade unsized, unbleached sulfate (Kraft) paper and paperboard intended for use as layer insulation in electrical apparatus such as coils and transformers. The scopeā¦
This article provides a comprehensive overview of ASTM D1306-88 (Reapproved 1996), the Standard Test Method for the Gravimetric Determination of Phthalic Anhydride Content in Alkyd Resins and Esters Containing Other Dibasic Acids. This method is essential for quality control inā¦
📜 Scope and Significance of D1301-91 ASTM D1301-91 (Reapproved 2020) covers standardized test methods for the chemical analysis of basic carbonate white lead and basic sulfate white lead pigments. Developed under the jurisdiction of ASTM Committee D01 on Paint andā¦
ASTM D1304-99 (Reapproved 2020) provides a comprehensive suite of test methods for evaluating adhesives relative to their use as electrical insulation. The standard covers procedures for adhesives in liquid, highly viscous, solid, or set states, targeting materials intended for curingā¦
ASTM D1298-12 (Reapproved 2017)¹, also designated as API MPMS Chapter 9.1, defines the standard hydrometer method for the laboratory determination of density, relative density, or API gravity of crude petroleum and liquid petroleum products. This procedure relies on a glassā¦
📜 Scope and Classification of Turpentine ASTM D13-02 specifies the requirements for spirits of turpentine as defined by the Code of Federal Regulations (Title 7, Part 160) and Terminology D 804. The standard covers four distinct kinds of turpentine, whichā¦
🛢️ Overview and Applicable Products ASTM D130-19 is a standard test method for determining the corrosiveness to copper of a wide range of petroleum products. It is also recognized as Federation of Societies for Paint Technology Standard No. Dt-28-65 andā¦
🧪 Overview and Scope of D1294-22 Standard D1294-22 establishes a test method for determining the breaking force (or load) and estimating the tensile strength and breaking tenacity of wool fiber bundles. The procedure specifically utilizes a 1-inch (25.4 mm) gageā¦
🔬 Test Scope and Significance ASTM D1296-23 establishes a comparative test method for assessing the odor of volatile solvents and diluents. It focuses on observing characteristic and residual odors to determine acceptability in solvent systems. The method is not suitableā¦