admin

📐 Scope and Analytical Overview ASTM D1278 – 91a (Reapproved 2020) defines standardized test methods for the chemical analysis of solid natural rubber in the forms supplied to the rubber industry. It is primarily intended for quality control acceptance and…

🔬 Scope and Analyte Composition ASTM D128-24a provides a comprehensive suite of test methods for the chemical analysis of conventional lubricating greases, defined as those consisting essentially of petroleum oil and metallic soap thickeners. The methods are designed to quantitatively…

🧪 Overview and Scope This specification, designated ASTM D1272-56 (Reapproved 2002), covers dry pentachlorophenol for use in the preservative treatment of wood. It was originally issued in 1953 and replaced D 1272-53T. The current edition is effective from September 10,…

ASTM D1274 – 95 (Reapproved 2000) specifies standard test methods for the chemical analysis of pentachlorophenol intended for use in the preservative treatment of wood. The procedures ensure the chemical conforms to the requirements of Specification D1272. Sampling prior to…

🧪 Overview and Scope of D1267-23 The ASTM D1267-23 standard defines a specific methodology for determining the gauge vapor pressure of liquefied petroleum gas (LP-Gas) products. This test method is applicable at temperatures starting from 37.8 °C (100 °F) and…

📌 Scope and Test Methods ASTM D127-19 (Designation: 133/79 (87)) is a standard test method for measuring the drop melting point of petroleum wax, including petrolatum. It is specifically utilized for petrolatums and microcrystalline waxes. The standard outlines two procedures:…

🧪 Introduction and Test Objective The ASTM D1264‑24a standard, titled “Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases,” provides a controlled laboratory procedure for evaluating the resistance of a grease to washout by water from a…

🛢️ Scope and Application of D1265-23 ASTM D1265-23a defines the manual method for sampling liquefied petroleum gases (LPG). This practice strictly requires the use of flow-through cylinders equipped with two valves. It is explicitly not applicable to single-valve cylinders or…

📏 Scope and Specifications The ASTM D1266-18 (Designation: 107/86) standard specifies the Lamp Method for the determination of total sulfur in liquid petroleum products. This test method is widely used in the petroleum industry and has been approved for use…

🎯 Scope and Classification of Pigments ASTM D126-87 (Reapproved 2023), under the jurisdiction of ASTM Subcommittee D01.31, establishes standardized test methods for the chemical analysis of pigments containing lead chromate and chromium oxide green. This scope specifically covers Chrome Yellow,…