Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🔍 Overview and Significance ASTM D1342-92 (Reapproved 2002) specifies a chromatographic test method for the determination of paraffin-type hydrocarbons in carnauba wax. This analysis is essential for quality control, allowing analysts to quantify the natural hydrocarbon content or detect adulterationā¦
📐 Test Scope and Specimen Types ASTM D1335-21 establishes the standard procedure for determining the tuft bind of pile yarn floor coverings. The test method quantifies the force required to either pull a tuft completely free from the backing structureā¦
The ASTM D1336 – 07 (Reapproved 2019) standard, under the jurisdiction of Committee D13 on Textiles, defines a specific test method for measuring the distortion of one set of yarns over another in woven cloth. This technique evaluates the propensityā¦
🧪 Scope and Significance of D1337-10 ASTM D1337-10 (Reapproved 2021) defines the Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength. This practice establishes a laboratory method for measuring the storage life of an adhesive by evaluatingā¦
🧪 Overview of Test Methods ASTM D1331-20 provides four distinct test methods for determining surface tension and interfacial tension in liquid materials, including paints, solvents, and surface-active agent solutions. These methods are categorized by the type of measurement and theā¦
📐 Scope and Referenced Documents D1334-18 establishes a definitive referee test method for the determination of the wool base content and the clean wool fiber present in a lot of raw wool. The procedure involves commercial-scale scouring of the entireā¦
📐 Materials and Manufacture The fabric specified in this standard must be composed of 100% jute fiber, with two cotton threads permitted in each selvage. If a selvage is present, it must not exceed 6 mm [¼ in.] in width. The minimumā¦
📐 Test Principle and Specimen Requirements The ASTM D1329-16 (Reapproved 2021) standard, Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test), provides a procedure for rapid evaluation of crystallization effects and for comparing viscoelastic properties of rubberā¦
📖 Scope and Material Requirements ASTM D1330-04 (Reapproved 2022) is the controlling specification for gaskets cut from sheet rubber intended for general service in water, air, and low-pressure steam systems. The standard explicitly excludes applications involving oils and strong acids,ā¦
🛡️ Scope and Material Overview This specification, ASTM D1325-94 (Reapproved 2000), covers the compositional and property requirements for Ammoniacal Copper Arsenate (ACA) and Ammoniacal Copper Zinc Arsenate (ACZA) solutions. These waterborne preservatives are specifically formulated for the pressure treatment ofā¦