Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🧪 Scope and Significance of the Test This test method, designated D1882‑17 (Reapproved 2021), establishes a standardized procedure for evaluating the effect of cooling system chemical solutions on organic finishes used in motor vehicles. The cooling system chemicals covered underā¦
📐 Test Principle and Specimen Scope This standard test method provides a procedure for determining the relative peel resistance of adhesive bonds formed between flexible adherends. The test employs a T-type peel specimen, specifically designed to evaluate the performance ofā¦
⚛️ Purpose and Applicability ASTM D1879-06 (Reapproved 2023) provides a standardized practice for exposing bonded adhesive specimens to ionizing radiation prior to evaluating radiation-induced changes in physical or chemical properties. The practice establishes reproducible exposure conditions across various radiation types,ā¦
🧪 Scope and Applicability of D1871-04 ASTM D1871-04 (Reapproved 2014) defines a standardized test method for determining the adhesion strength of single-filament wire to vulcanized rubber compounds. This test is specifically applicable to wires made from brass, bronze, or zincā¦
The ASTM D1874-16 standard specifies requirements for water- or solvent-soluble liquid adhesives used in automatic machine sealing of top flaps of fiberboard shipping cases. It covers starch, dextrin, casein, resin base, and other liquid adhesives, except pressure-sensitive types. The standardā¦
📐 Scope and Definitions of Density Testing This standard, ASTM D1875-03 (Reapproved 2018), covers the measurement of density (weight per gallon) of adhesives and components in liquid form. SI units are regarded as the standard. The density is defined asā¦
ASTM D1869 – 15 (Reapproved 2022) establishes the standard specification for rubber rings used in sealing joints of fiber-reinforced cement pipe. These gaskets are critical for ensuring leak-tight performance in both pressure and non-pressure applications. The standard classifies rings basedā¦
ASTM D187-24 provides a standardized, qualitative method for evaluating the burning properties of kerosene intended for illuminating purposes. Developed under the jurisdiction of ASTM Subcommittee D02.E0 on Burner, Diesel and Non-Aviation Gas Turbine Fuels, this test method subjects the fuelā¦
ASTM D1867-13 provides the standard specification for copper-clad thermosetting laminates used primarily in the fabrication of printed wiring boards. This article outlines the essential classification parameters, material purity requirements, and ordering guidelines defined by the standard, focusing on grades, copperā¦
The ASTM D1868-24 standard, formally under the jurisdiction of ASTM Committee D09 on Electrical and Electronic Insulating Materials, establishes a definitive methodology for the detection and measurement of partial discharge (corona) pulses. It is specifically designed for evaluating insulation systemsā¦