Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📋 Scope and Overview ASTM D1921-18 describes test methods for measuring particle size of plastic materials in powdered, granular, or pelleted forms using dry sieving. The lower measurement limit is approximately 38 µm (No. 400 sieve); for smaller particles, sedimentationā¦
The ASTM D1914-95 (Reapproved 2022) standard serves as a critical reference for professionals in air quality and meteorology, offering a comprehensive set of conversion units and factors. It ensures consistency when translating historical or diverse measurement data into the Internationalā¦
📐 Test Overview and Scope This standard, designated D1916-93 (Reapproved 1997), specifies the Standard Test Method for Penetration of Adhesives. It covers the determination of adhesive penetration under pressure in systems with at least one porous adherend. The method isā¦
📐 Specimen Geometry and Preparation The test specimen for ASTM D1912-00 (Reapproved 2023) is a cone-shaped sample cut with a steel die or equivalent shearing device, matching the specific geometry outlined in Fig. 2(a) of the standard. Specimens can beā¦
📋 Scope and Significance This test method, designated D1913−00 (Reapproved 2023), provides a qualitative evaluation of the surface repellency to water of garment-type leathers. It is not applicable to wet blue. The values stated in inch-pound units are standard. Thisā¦
📋 Overview and Scope ASTM D1907/D1907M-12 (2018) is a standard test method for determining the linear density of yarn (yarn number) using the skein method. It applies to all types of yarn in package form, with limitations on stretch andā¦
📐 Scope and Significance ASTM D1909-13 provides standardized tables for commercial moisture regains (CMR) and commercial allowances (CA) used for textile fibers. These values are primarily intended for determining commercial weight during buying and selling, calculating yarn linear density, andā¦
📐 Overview and Significance This test method, designated D1901-10 (Reapproved 2020), covers the measurement of the relative evaporation time of halogenated organic solvents and their admixtures. It is applicable under standard conditions without excessive drafts or high-velocity air currents. Theā¦
ASTM D1903‑08 (Reapproved 2017) provides a standardized practice for determining the average coefficient of thermal expansion for electrical insulating liquids of petroleum origin and askarels containing PCBs. This property is critical for the reliable design and operation of electrical apparatus suchā¦
ASTM D1896/D1896M-10 (Reapproved 2017) establishes a comprehensive practice for the transfer molding of test specimens from thermosetting molding materials. This method is particularly effective for compounds exhibiting intermediate viscosity non-Newtonian flow, bridging the gap between compression and injection molding techniques.ā¦