Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D1937-23 defines a standardized method for determining the mass strength of pelleted carbon black. This test method measures the force required to compact a cylindrical column of pellets, providing a critical indicator of flowability in bulk handling systems. The…
🧾 Standard Overview and Nitrogen Types The ASTM D1933-03 (Reapproved 2017) specification defines nitrogen gas used as an electrical insulating material in electrical equipment. It covers three types of nitrogen obtained from air liquefaction processes: Type I: Dried after liquefaction.…
📐 Scope and Referenced Standards This specification covers the requirements for fully cured silicone rubber-coated glass fabric in sheet form, full-width rolls, and tapes used as electrical insulation. It provides the dimensional, physical, and electrical requirements necessary to ensure product…
📐 Scope and Test Principle ASTM D1932-19, titled the Standard Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes, provides a standardized procedure for evaluating the relative thermal endurance of these insulating materials. The method determines the time necessary…
This practice, designated D 1928 – 96, provides standardized methodologies for the preparation of compression-molded test sheets and specimens derived from Types I, II, III, and IV polyethylene plastics, as defined in Specification D 1248. Both branched (low-density) and linear…
🔥 Method Overview and Scope ASTM D1929-23 defines a standardized fire-test-response method for determining both the flash ignition temperature (FIT) and spontaneous ignition temperature (SIT) of plastic materials under controlled laboratory conditions. The test utilizes a specialized hot-air furnace, often…
📋 Specimen Geometry and Preparation ASTM D1922-23 specifies two distinct specimen types for determining the propagation tear resistance of plastic films and thin sheeting using the pendulum (Elmendorf) method. The rectangular specimen is commonly used for general screening, while the…
🧪 Scope and Significance of Carboxyl Content ASTM D1926‑00 (Reapproved 2019) defines the standard test methods for determining the carboxyl content (ion‑exchange capacity) of cellulose from any source. Carboxyl groups are a primary indicator of the anionic surface charge of…
📐 Scope, Significance, and Test Methods ASTM D1917-03 (Reapproved 2022) provides standardized test methods for determining the mill shrinkage of hot-polymerized styrene-butadiene rubber (SBR) and its compounds. This property is critical for controlling material behavior during downstream processing such as…
📐 Scope and Applicability ASTM D1918/D1918M — 95 (Reapproved 2017) is a standardized test method for determining the asbestos content of untreated chrysotile asbestos textile materials. These textiles are usually blends of asbestos and organic fibers. The method is also…