Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D1863/D1863M – 05 (Reapproved 2024) provides a standardized specification for mineral aggregates used on built-up roofs. It covers crushed stone, crushed slag, and water-worn gravel, focusing on quality, durability, and appropriate gradation for optimal performance with hot bitumen floodā¦
ASTM D1864/D1864M – 89 (Reapproved 2023) defines the standard test method for determining the moisture content in mineral aggregates used on built-up roofs. This procedure is a critical compliance requirement of Specification D1863/D1863M and serves as a key quality controlā¦
📋 Scope and Significance This standard, formally designated as ASTM D1865/D1865M, establishes a definitive test method for evaluating the hardness of mineral aggregate surfacing materials used in built-up roofing (BUR) systems. The primary objective is to provide a reliable, empiricalā¦
The ASTM D 1859 – 71 (Reapproved 2000) standard establishes the specification for petroleum intended specifically for blending with creosote (conforming to D 390). This blended oil is employed in the pressure preservative treatment of timber to enhance fluid penetrationā¦
🧪 Scope and Summary of the Test Method This standard, designated D1860 – 95 (Reapproved 2000), defines a distillation-extraction procedure for the simultaneous determination of moisture content and the amount of creosote or creosote-base preservative in wood. Its use isā¦
The ASTM D1857/D1857M −24 standard provides the definitive empirical test method for evaluating the fusibility of ash derived from coal and coke. By observing triangular ash cones under strictly controlled heating conditions and specific atmospheres, this method generates critical temperatureā¦
ASTM D1858–63 (Reapproved 2000) specifies the requirements for creosote-petroleum solution, a blend used in the preservative treatment of timber. The standard defines the composition, referencing ASTM D390 for coal-tar creosote and ASTM D1859 for petroleum, and mandates a minimum creosoteā¦
🛢️ Scope and General Requirements The ASTM D1854-02 specification defines requirements for a jet-fuel-resistant concrete joint sealer, hot-applied elastic type. This material is intended for sealing joints in concrete pavement exposed to jet fuel spillage, such as airfields or industrialā¦
⚙️ Apparatus Requirements and Setup The Abson Method relies on precise laboratory equipment to ensure the recovered asphalt retains its key properties. The standard requires a high-force centrifuge for the initial separation and a specialized distillation assembly for final solventā¦
📐 Scope and Application This classification covers descriptions of properties that may be observed in weathered latex paint films. These descriptions should be used in reporting the condition of such paint films. Note that defects observed in exterior latex paintsā¦