Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🔬 Scope and Significance of ASTM D3892 Designation D3892 – 15 (Reapproved 2020) specifies the standard practice for the packaging and packing of all thermoset and thermoplastic resins and fabricated shapes. Approved for use by agencies of the U.S. Departmentā¦
🔍 Scope and Significance of ASTM D3890-18 This standard practice, designated D3890-18, establishes a uniform procedure for determining the number of actuations required to prime a mechanical pump dispenser. It covers both spray and flow types intended for consumer products.ā¦
🧪 Significance and Use This practice provides standardized procedures for preparing glass panels to ensure uniformity in testing paint, varnish, lacquer, conversion coatings, and related products. The methods described are designed to yield clean, consistent surfaces for reliable test results.ā¦
🏭 Scope and Significance of ASTM D3888-15 ASTM D3888-15 (Reapproved 2022) is the definitive terminology standard for ring, rotor, and air jet yarn spinning systems. Originally developed in the 1980s exclusively for open-end spinning, this revision significantly expands coverage toā¦
Designation: D3889/D3889M – 96 (Reapproved 2020) 📐 Scope and Summary of the Standard ASTM D3889/D3889M covers a specific test method for determining the adherence of pressure-sensitive tapes to a standard linerboard or other similar surface at low temperature. The testā¦
📐 Scope and Referenced Documents ASTM D3887-96 (Reapproved 2008) establishes standard tolerances for knitted fabrics, covering properties such as yield, mass (weight), width, length, fabric count, bursting strength, moisture regain, thickness, extractable matter, and fiber composition. This specification applies toā¦
ASTM D3885-07a (Reapproved 2024), Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method), provides a standardized procedure for evaluating the resistance of woven and nonwoven fabrics to combined flexing and abrasive wear. Often referred to asā¦
📐 Scope and Specimen Requirements This test method, designated D3886-22, covers the determination of abrasion resistance for woven and knitted textile fabrics, including both conditioned and wet specimens, using the inflated diaphragm apparatus. It is specifically not applicable to floorā¦
🔍 Scope and Significance of D3883-04 ASTM D3883-04 (Reapproved 2020) provides a standardized method for determining the relationship between the length of a woven fabric and the length of the yarn consumed to create it. This is achieved by measuringā¦
📐 Scope and Referenced Standards for D3884-22 ASTM D3884-22 is a standard guide that specifically covers the determination of the abrasion resistance of textile fabrics using the rotary platform abrader. The standard is strictly defined in its scope, listing relatedā¦