Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
The ASTM Standard D3880/D3880M-90 (Reapproved 2017) provides a test method for evaluating the strength-giving properties of asbestos fibers used in asbestos-cement products. The procedure determines the number of strength units assigned to a fiber sample, essential for optimizing fiber quantity…
📏 Scope and Significance of ASTM D3882 The ASTM standard D3882-08 (Reapproved 2020), issued under the fixed designation D3882, provides the definitive test method for evaluating the bow and skew of filling yarns in woven fabrics and courses in knitted…
📜 Scope and Applicability of ASTM D388-23 ASTM D388-23 establishes the standard classification of coals by rank, defined by their degree of metamorphism or progressive alteration in the natural series from lignite to anthracite. This classification is specifically applicable to…
ASTM D3878-23 is the definitive terminology standard for composite materials reinforced with high-modulus fibers (modulus greater than 20 GPa / 3 × 106 psi). By establishing a consistent technical lexicon, this standard is fundamental for unambiguous communication across material specification,…
📐 Scope and Application of D3879-91 ASTM D3879-91 (Reapproved 2004) establishes the procedure for obtaining composite and master composite samples from commercial milled amphibole asbestos fibers. The standard outlines a rigorous methodology for taking a sample at the mine, factory,…
🧪 Test Method Principles and Scope ASTM D3876-96 (Reapproved 2021) defines a standard procedure for the determination of methoxyl and hydroxypropyl substitution content in cellulose ether products. The method employs a Zeisel-gas chromatographic (GC) technique, where the cellulose ether is…
📐 Standard Overview and Scope ASTM D3877-08 describes standard test methods for one-dimensional expansion, shrinkage, and uplift pressure of soil-lime mixtures. These methods are used to determine the optimum lime content for controlling volume changes caused by moisture fluctuations. The…
📐 Scope and Specimen Requirements ASTM D3874-20 provides a standardized procedure for preliminarily differentiating materials based on their resistance to ignition from electrically-heated hot wire sources. This test method is specifically designed for molded or sheet materials commonly utilized in…
ASTM D3875-15 (Reapproved 2023) describes a potentiometric titration method for determining alkalinity in brackish water, seawater, and brines. This standard is essential for evaluating water chemistry in enhanced oil recovery processes and assessing scaling potential in industrial systems. The test…
🔬 Summary and Significance of the Test Method The ASTM D3873-01 standard provides a rapid qualitative test method for determining the valency state of the arsenic component in ammoniacal copper zinc arsenate (ACZA) solutions. Specifically, it verifies that the air-oxidation…