Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D4784-23 establishes a rigorous framework for calculating the density of saturated Liquefied Natural Gas (LNG) mixtures under defined conditions. This specification is essential for ensuring uniformity and high precision in LNG density predictions, directly supporting critical applications such asā¦
🧪 Overview and Test Method Summary This standard, designated ASTM D4785-20, provides a rigorous test method for the quantification of low levels of radioactive iodine isotopes in water. The procedure relies on the chemical isolation of iodine from a 4ā¦
🧪 Scope and Summary of Test Methods ASTM D4783 −01 (Reapproved 2021) outlines standard test methods for evaluating the resistance of liquid adhesive preparations to microbial attack while stored in the container. The core objective is to determine whether anā¦
📐 Scope and Apparatus Specifications ASTM D4781-24, under the jurisdiction of Committee D32 on Catalysts, establishes a standardized procedure for determining the mechanically tapped packing density of fine catalyst and catalyst carrier particles. The method is strictly limited to particlesā¦
🧪 Test Method Summary and Critical Apparatus ASTM D4782‑24 outlines a wet chemistry procedure for determining palladium in fresh molecular sieve catalysts containing approximately 0.5 % Pd by weight. The sample is digested with hydrofluoric acid to remove the silica matrix,ā¦
⚙️ Scope and Application This standard test method, designated D4780-23, covers the determination of the specific surface area of catalysts and catalyst carriers in the low surface area range of 0.05 m²/g to 10 m² It utilizes a volumetric measuringā¦
ASTM D4779-93 provides a standardized method for determining total carbon (TC), organic carbon (OC), and inorganic carbon (IC) in high purity waters such as demineralizer effluent, condensate, and electronic grade rinse water. The method is specifically validated for a concentrationā¦
ASTM D478-02 (Reapproved 2019) defines the specifications for zinc yellow (zinc chromate) pigments, which are critical components in anti-corrosion primer systems for metal substrates. The standard establishes compositional purity and performance requirements for two distinct grades of this reactive chromateā¦
The Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure, designated D4776/D4776M-18, is a widely recognized standard under the jurisdiction of ASTM Committee D13. It establishes a uniform procedure for evaluatingā¦
📐 Specimen Geometry and Material Selection Proper construction of the test specimen is fundamental to achieving valid results under ASTM D4778-24. The test specimen is a metal tube with a defined outside diameter of 3/8 in. (9.5 mm) or 1/2ā¦