Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🏠 Scope and Application ASTM D4803-24 provides a standard test method for predicting heat buildup in rigid and flexible PVC building products. This heat buildup is above ambient air temperature and is relative to black, occurring due to absorption of…
📐 Specimen Requirements and Test Setup Test Method D4804-23 specifically addresses the small-scale flammability testing of nonrigid solid plastics. These materials, typically thin films or flexible sheets, are defined by their tendency to distort, shrink, or be consumed up to…
ASTM D4802-16 (Reapproved 2024) provides the standard specification for monolithic poly(methyl methacrylate) (PMMA) acrylic plastic sheets used in general-purpose applications. It consolidates discontinued specifications, including Fed. Spec. L-P-391D, D702, and D1547, into a single comprehensive document. The material must be…
📖 Scope and Purpose of the Classification System ASTM D4800-94 (Reapproved 2023), under the jurisdiction of Subcommittee D14.60 on Adhesive Material Classification System, provides a standardized guide for classifying and specifying adhesives. As outlined in Section 1.1, the system serves…
📐 Scope and Material Classification ASTM D4801 – 08 (Reapproved 2016) establishes the standard specification for extruded (cast or blown) and compression-molded polyethylene sheeting. The specification covers low-, medium-, and high-density polyethylenes and their copolymers, requiring a nominal thickness of…
ASTM D4799/D4799M is a standardized practice defining specific test conditions and procedures for the accelerated weathering of bituminous roofing and waterproofing materials. The practice specifically utilizes fluorescent UV and condensation exposures conducted according to Practices G151 and G154. The apparatus…
📜 Overview and Significance of ASTM D480 ASTM D480-88 (Reapproved 2020), titled “Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes,” provides a comprehensive set of procedures for evaluating these metallic pigments. The standard covers both…
📐 Specimen Geometry and Preparation In accordance with Practice D1669/D1669M, thin films of bitumen are uniformly applied to standard aluminum panels. For composite materials such as shingles, specimens are cut directly from the manufactured product to the required dimensions. Prior…
🧱 Specimen Substrate and Material Configuration ASTM D4796-17 (Reapproved 2022) provides a definitive instrumental method for evaluating the bond strength of thermoplastic pavement marking materials. The test relies on a standardized substrate: a cement brick. As defined in Section 3.2.1,…
📐 Scope and Significance of D4797-17 ASTM D4797-17 (Reapproved 2022) provides standardized gravimetric test methods for the analysis of white and yellow thermoplastic pavement markings. The primary focus of these methods is the determination of the binder content and the…