Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
This article outlines the key principles and procedures of ASTM D4764 −01 (Reapproved 2023), the standard test method for determining titanium dioxide (TiO₂) content in liquid paints using X-ray fluorescence (XRF) spectroscopy. This method provides a rapid, accurate, and reliableā¦
📋 Scope and Application This test method, designated ASTM D4765-13 (Reapproved 2018), covers the simultaneous collection and separate measurement of gaseous fluorides (e.g., hydrogen fluoride) and particulate fluorides in industrial workplace atmospheres. It is applicable for industrial hygiene evaluation andā¦
ASTM D4763-06 (Reapproved 2020) provides standardized guidelines for the identification of 90 chemicals commonly found in water or surface layers using room-temperature fluorescence spectroscopy. The practice is based on spectral libraries developed by the U.S. Environmental Protection Agency and theā¦
ASTM D4761-19 serves as a cornerstone standard for evaluating the mechanical properties of stress-graded lumber and other wood-based structural materials. Derived from the foundational principles of Test Methods D198, these test methods are specifically designed to accommodate both rigorous laboratoryā¦
ASTM D4762-23 provides the essential roadmap for testing continuous‑fiber reinforced polymer matrix composite materials. Developed by Committee D30 on Composite Materials, it summarizes the most critical standards and directs users to the specific, detailed test methods required for their programs.ā¦
📋 Scope and Significance This practice, designated D4759‑11 (Reapproved 2024), covers a procedure for determining the conformance of geosynthetic properties to standard specifications (Section 1.1). It provides a systematic approach for purchasers to evaluate whether materials meet specified criteria, supportingā¦
📜 Scope and Significance of the Classification ASTM D476-15 (Reapproved 2021) provides a standard classification for eight types of dry pigmentary titanium dioxide products. These types are grouped by their composition, typical end-use applications, and fundamental performance properties. The standardā¦
🧪 Objective and Scope of D4758-92 The ASTM D4758-92 test method defines a rapid quality control procedure for determining the nonvolatile content (total solids) of commercial synthetic latex vehicles. The specified conditions of 180°C for 20 minutes were specifically selectedā¦
🏗️ Scope, Standards, and General Requirements This standard practice, designated ASTM D4756-15 (Reapproved 2021), establishes the basic requirements and methods for the installation of rigid poly(vinyl chloride) (PVC) siding, soffits, and their associated accessories on the exterior wall and soffitā¦
⚠️ Placard Warning and Hazard Statements Section 5 of ASTM D4757‑98 specifies the exact language that must appear on a placard attached to a solvent vapor degreaser. These statements address the full spectrum of risks associated with halogenated solvents, includingā¦