Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📐 Specimen Geometry and Test Materials This test method, designated D4754-18, provides a standardized protocol for two-sided liquid extraction of plastic materials using the FDA Migration Cell. The method is specifically designed for materials that can be fabricated into film,…
📐 Overview of ASTM D4755 Test Method ASTM D4755-95 (Reapproved 2020) establishes a standard procedure for evaluating free halogens in halogenated organic solvents and their admixtures. The presence of free halogens is a critical quality indicator as they react with…
🔬 Scope and Significance of D4752-20 This standard practice describes a solvent rub technique for assessing the MEK resistance of ethyl silicate (inorganic) zinc-rich primers. The MEK resistance of some two-component ethyl silicate zinc-rich primers has been shown to correlate…
📐 Scope and Application ASTM D4753‑24 provides minimum requirements for general‑purpose balances and standard masses used in testing soil, rock, and related construction materials. This guide offers guidance for evaluating, selecting, and specifying such equipment. Accuracy is specified through the…
📖 Scope and Significance This test method, designated D 4750 – 87 (Reapproved 2001), provides standard procedures for measuring the level of liquid in a borehole or monitoring well (observation well) and specifically determining the stabilized liquid level. The method…
🧪 Standard Scope and Terminology for D4751-21 The D4751-21 standard establishes test methods for determining the Apparent Opening Size (AOS), denoted as O95. This critical property indicates the approximate largest particle that would effectively pass through a geotextile. The standard…
📐 Composition and Types of Pure Para Red Toner This specification covers the red pigment commercially known as pure para red toner, available in two distinct Types: Type I (light) and Type II (dark). Both types must be in a…
📐 Overview and Applicability of the Test Method ASTM D4748-10 (Reapproved 2020) establishes a standardized, non-destructive procedure for determining the thickness of bound pavement layers using short-pulse ground penetrating radar (GPR). The test method is officially under the jurisdiction of…
📐 Scope and Applicability ASTM D4749/D4749M-87 (Reapproved 2019) provides a standardized method for sieve analysis of coal and designating coal size based on test data. It applies to raw and prepared coals, including crushed, cleaned, or screened samples, covering size…
📊 Overview and Significance of D4746-20 ASTM D4746-20 is an empirical standard test method for the determination of quinoline insolubles (QI) in tar and pitch by pressure filtration. This test method yields results comparable to those obtained by Test Method…