Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📜 Scope and Significance ASTM D4817-88 (Reapproved 2021) provides the standard classification for stearic acid used as a compounding material in the rubber industry. This standard establishes a consistent basis for categorizing this critical raw material. Stearic acid of commerceā¦
📐 Scope and General Requirements This specification covers the establishment of requirements for liquid automotive fuels used in ground vehicles with spark-ignition engines. It describes various characteristics of fuels for use over a wide range of operating conditions, including gasolineā¦
ASTM D4811/D4811M-16 (Reapproved 2023), under the jurisdiction of ASTM Committee D08 on Roofing and Waterproofing, specifies requirements for nonvulcanized (uncured) rubber sheet used as roof flashing. This material, typically made from EPDM or CR, is intended for weather-exposed watertight flashingā¦
📐 Test Method Scope and Applicability This test method, designated D4812–19, covers the determination of the resistance of plastics to breakage by flexural shock using unnotched cantilever beam specimens. The energy extracted from standardized pendulum-type hammers is measured, with resultsā¦
🎯 Scope and Applicability of D4809-18 ASTM D4809-18 establishes a precision test method for determining the heat of combustion of liquid hydrocarbon fuels using an oxygen bomb calorimeter. It is specifically designed for aviation turbine fuels where the permissible differenceā¦
🔍 Scope and Significance This test method provides a rapid and simple field determination of hydrogen sulfide (H₂S) in natural gas pipelines. The values are stated in SI units, and the method is essential for maintaining gas quality specifications, preventingā¦
📐 Scope and Method Classification ASTM D4808-23 provides standard test methods for determining the hydrogen content of various petroleum products using continuous wave, low-resolution nuclear magnetic resonance (NMR) spectroscopy. It covers a broad range of products from light atmospheric distillatesā¦
🔍 Scope and Application This specification, ASTM D4806-21, covers nominally anhydrous denatured fuel ethanol intended for blending with unleaded or leaded gasolines at 1% to 15% by volume. It is used in automotive spark-ignition engines as covered by Specification D4814ā¦
The ASTM D4807-05 (Reapproved 2020) / MPMS Chapter 10.8 standard provides a precise gravimetric method for determining sediment in crude oils via membrane filtration. This standard, under the joint jurisdiction of ASTM D02 and the API Committee on Petroleum Measurement,ā¦
🎯 Purpose and Scope of D4805-88 ASTM Standard D 4805 – 88 (Reapproved 1994)e1 serves as the central repository for terminology under the jurisdiction of ASTM Committee D-20 on Plastics. Its primary mission is to compile a comprehensive collection ofā¦