Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM Standards Interpretation
📐 Specimen Geometry and Conditioning The standard test method D2213-00 (Reapproved 2024) specifically addresses the compressibility of sole leather. It is crucial to note that this method does not apply to wet blue leather. The test specimen must be cut…
ASTM D2214 – 02 provides a standardized transient procedure for estimating the thermal conductivity of leather and other low-conductivity materials using the Cenco-Fitch apparatus. This test method is essential for evaluating the insulating properties of materials used in footwear construction,…
The ASTM D2211-00 (Reapproved 2021) standard specifies a test method for measuring the elongation or stretch of leather under tensile load. Applicable to all leather types except wet blue, this method is essential for development, quality control, and specification compliance.…
ASTM D2212-00 (Reapproved 2021) establishes a standardized procedure for evaluating the slit tear resistance of light leathers, including those used in shoe uppers, gloves, and upholstery. By measuring the load required to tear the cross-sectional thickness of the leather at…
ASTM D2209-00 (Reapproved 2021) defines the standard test method for determining the tensile strength of leather. The method measures the load required to rupture a test specimen with a width of 1/2 inch (12.7 mm). Tensile strength is calculated by…
🔬 Scope and Significance of the Mullen Test ASTM D2210-21, formally designated as the Standard Test Method for Grain Crack and Extension of Leather by the Mullen Test, is a crucial procedure for evaluating the mechanical durability of light leathers.…
📐 Test Apparatus and Specimen Requirements The D2207 test method defines a specific apparatus setup to ensure consistent and reproducible measurements of bursting strength. The primary equipment includes a ball burst fixture attached to a vertical testing machine conforming to…
ASTM D2208-16 (Reapproved 2023) is a standard test method for determining the breaking strength of leather using the grab method. It is designed for light, soft leathers, boarded, sueded, embossed leathers, and narrow strap, welt, lace, and round belt leathers…
🧪 Scope, Significance, and Terminology The ASTM D2203-01 (Reapproved 2023) standard outlines a laboratory procedure for determining whether a sealant causes staining of porous substrates such as masonry, concrete, and stone (marble, limestone, sandstone, granite). Staining in a building is…
ASTM D2205-20 is a comprehensive guide for selecting appropriate test methods to evaluate traffic paints. It covers ready-mixed solvent-borne and waterborne paint products of sprayable consistency intended for use as a reflecting traffic guide on paved roadways. While the standard…
📐 Scope and Applications This standard practice, designated D2201-23, provides guidelines for preparing zinc-coated and zinc-alloy-coated steel panels for evaluating paints, varnishes, lacquers, conversion coatings, and related products. It encompasses various coating types, including hot-dipped galvanized, one-side galvanized, electrogalvanized, zinc-iron…
📐 Understanding the Scope and Significance of ASTM D2202-00 ASTM D2202-00 defines a rigorous laboratory procedure for determining the degree of slump or sag exhibited by a sealant when utilized in a vertical joint configuration. This test is fundamental for…