Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM Standards Interpretation
📜 Scope and Classification ASTM D4118-23 specifies the performance requirements for woven fabrics (any fiber or mixture) used in coveralls, dungarees, overalls, and shop coats. It recognizes two levels of wearing severity and is explicitly not applicable to fabrics for…
The ASTM D4116-20 standard provides performance specifications for knitted and woven fabrics used in women’s and girls’ corsets, girdles, and combination garments. It applies to fabrics composed of any textile fiber or mixture of fibers, excluding knitted lace and interlining…
ASTM D4117-01 outlines performance requirements for woven fabrics used in women’s and girls’ intimate apparel, including robes, negligees, nightgowns, pajamas, slips, and lingerie. This specification applies to all fiber types and blends, with requirements evaluated in both length and width…
The ASTM D4114-21 standard, officially titled Standard Performance Specification for Woven Flat Lining Fabrics for Women’s and Girls’ Apparel, provides manufacturers and quality assurance professionals with a definitive set of benchmarks for lining materials. Developed under the jurisdiction of ASTM…
📐 Scope and Fabric Types ASTM D4115-20 establishes the performance specification for woven and knitted fabrics intended for women’s and girls’ dress gloves. Per Section 1.1, it covers fabrics composed of any textile fiber or blend. Section 1.2 explicitly exempts…
🔍 Scope and Terminology This performance specification, designated D4113-24, covers woven fabrics comprised of any textile fiber or mixture of fibers intended for use in slipcovers. The requirements apply to both length and width directions where fabric direction is pertinent.…
🧵 Scope and Terminology ASTM D4111-24 is a performance specification for woven napery and tablecloth fabrics used in household and institutional environments. It covers fabrics made from any textile fiber or mixture. The requirements apply to both the length and…
📐 Scope and Referenced Standards This performance specification, designated D4112-02 (Reapproved 2008), covers woven fabrics comprised of any textile fiber or mixture of fibers for use in umbrellas. The requirements apply to both length and width directions where fabric direction…
🔍 Overview and Scope of D411-08 ASTM D411-08, established by Committee D09 on Electrical and Electronic Insulating Materials, provides standardized methods for testing shellac intended for electrical insulation. The standard specifically targets shellac in dry button or powder form, typically…
ASTM D4110-02 establishes performance specifications for knitted fabrics used in men’s and boys’ bathrobes, dressing gowns, and pajamas. This standard ensures fabric quality across length and width directions, referencing key ASTM and AATCC test methods for properties such as bursting…
🔍 Scope and Application of ASTM D4109 – 02 ASTM D4109 – 02 defines the performance specification for woven fabrics used in men’s and boys’ coveralls, dungarees, overalls, and shop-coats. It applies to any textile fiber or mixture, covering both…
This article outlines the essential aspects of ASTM D4106-20, which provides an analytical procedure for determining the transmissivity and storage coefficient of nonleaky confined aquifers. The Theis nonequilibrium method is employed to analyze water-level responses during constant discharge or injection…