Category ASTM Standards

📐 Scope and Application ASTM D4153-22 is a performance specification for woven fabrics used in the manufacture of men’s, women’s, and children’s handkerchiefs, including both utilitarian and decorative types. This standard specifies requirements for fabric properties such as tearing strength,…

📐 Scope and Application of D4154-22 ASTM D4154-22 establishes the performance specification for knitted and woven fabrics comprising any textile fiber or mixture of fibers used in the manufacture of men’s and boys’ beachwear and sports shirts. These requirements apply…

🛡️ Scope and Test Method Overview ASTM D4151-23, under the jurisdiction of Committee D13 on Textiles, provides a standardized test method for assessing the flammability of blanket fabrics. It aims to identify materials that ignite easily and propagate flame across…

📐 Scope and Classification Basis This standard, designated D4149-82 (Reapproved 2012), provides a classification of both qualitative and quantitative techniques for the collection of phytoplankton from inland surface waters. The selection of a specific technique is critically dependent upon the…

📐 Standard Scope and Application Domains ASTM D4150 – 23a is the authoritative terminology standard for the gaseous fuels industry, developed by Committee D03. It consolidates the definitions, abbreviations, and acronyms used in the sampling, analysis, processing, transmission, and distribution…

🔬 Standard Practice for Applying Coil Coatings: ASTM D4147-18 ASTM D4147-18 (Reapproved 2023) provides a standardized laboratory practice for applying uniform coil coating films onto flat metal panels using wire-wound drawdown bars. This practice is specifically designed to simulate roll-coated…

The ASTM D4148-82 (Reapproved 2012) standard specifically addresses the linear enumeration of phytoplankton populations in surface waters using the Sedgwick-Rafter (S-R) counting method. This test method establishes a uniform procedure for the taxonomic identification and quantification of algal cells to…

ASTM D4146-10 (Reapproved 2022) provides a standardized procedure for evaluating the formability and adhesion of factory-applied zinc-rich primer/chromate complex coatings on steel substrates. This test method is essential for quality control in the coil coating industry, simulating the stresses encountered…

🔬 Scope and Significance of D4144-94 Ultraviolet (UV) curing coatings, particularly those relying on free radical chemistry, are inherently prone to premature polymerization during storage. The ASTM D4144-94 standard establishes a rigorous protocol for estimating the package stability of these…

ASTM D4145-10 evaluates the flexibility and adhesion of organic coatings on prepainted metallic sheets under deformation. This test method simulates bending stresses found in fabrication processes like roll forming and brake bending, providing a means to qualify coating systems and…

🧪 Introduction to ASTM D4142-89 ASTM D4142-89 (Reapproved 2022) is a standard guide that outlines methods for testing epoxy resins. It covers a range of properties including epoxy content, hydrolyzable chlorine, total chlorine, viscosity, color, and density. The guide is…

📐 Scope and Referenced Documents ASTM D4143‑16 (Reapproved 2022) is a standard guide that covers methods suitable for testing latex vehicles. Certain of these methods were developed expressly for latex vehicles, while others were created for formulated water‑ or solvent‑based coatings…