Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
SAE J1965 specifies test methods and performance requirements for wheel fixing nuts used in commercial vehicles and multipurpose passenger vehicles. This recommended practice covers one- and two-piece flange nuts, single and inner/outer ball seat nuts, and rim clamp nuts. Byā¦
SAE J1949-2015 specifies dimensional requirements for high-pressure fuel injection pipe connections used in diesel engines. This standard covers 60° female cones with external threaded connectors (Types 1 and 2) and the associated tube nut and male cone assembly. While theā¦
This SAE Recommended Practice establishes design guidelines for mechanical and electrical brake adjustment limit stroke indicators used on cam or disc air-brake actuators. The standard specifies how these indicators must function to alert drivers and technicians when the foundation brakesā¦
1. Scope and Applicability The SAE J1957-2011 standard establishes test procedures, performance requirements, and guidelines for center high mounted stop lamps (CHMSL) intended for use on vehicles with an overall width less than 2032 mm. The CHMSL is an additionalā¦
The SAE J1946 standard defines the nominal dimensions and tolerances for companion flanges used in commercial vehicle and bus drivetrains. It covers two distinct types: Type A (external pilot) and Type S (internal pilot), which are equivalent to ISO 7646ā¦
Thin resinous coatings applied to the metallic outer diameter (O.D.) of radial lip-type shaft seals are a proven solution for achieving a reliable seal even when the mating bore finish is too rough (typically exceeding 2.54 μm Ra) or inā¦
Overview of the Standard SAE J1948-2021 is a recommended practice that provides a standardized test procedure for evaluating occupant restraint systems in heavy-duty truck sleeper berths. The primary purpose is to determine whether the restraint system can sustain the requiredā¦
Selecting the right nonmetallic flexible hose assembly for a marine piping system is critical for safety and regulatory compliance. SAE J1942-1 provides a convenient listing of hose assemblies that have been qualified in accordance with SAE J1942 and 46 CFRā¦
Scope and Importance This standard, developed with the U.S. Coast Guard, specifies requirements for nonmetallic flexible hose assemblies in commercial marine vessels. It covers various systems including fluid power, fuel, lube oil, water, and pneumatic systems. Compliance ensures safe operationsā¦
SAE J193 is a long-standing recommended practice that defines test procedures for ball stud and socket assemblies. Originally issued in 1970 and most recently revised in 1996, the standard was declared stabilized in October 2012 by the SAE Materials, Processesā¦