Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
The SAE J1992-2023 standard provides minimum performance requirements and uniform laboratory procedures for fatigue testing of disc wheels, demountable rims, and bolt-together divided wheels intended for normal highway use on military trucks, buses, truck-trailers, and multipurpose vehicles. This article summarizesā¦
For engineers developing wheels and tires for passenger cars, light trucks, and multipurpose vehicles, simulating real-world road hazards like potholes is critical for evaluating impact resistance. SAE J1981 provides a standardized pendulum-based frontal impact test that replicates these conditions inā¦
🛠️ Note: this article focuses on engineering interpretation, not clause-by-clause translation. SAE J198 is a recommended practice that defines testing methods and minimum performance criteria for windshield wiping systems on trucks, buses, multipurpose passenger vehicles, and light-duty utility vehicles. Itā¦
On-Board Diagnostic (OBD) regulations mandate that vehicles support standardized communication of emission-related diagnostic data to generic test equipment. SAE J1979-2017 (E/E Diagnostic Test Modes) specifies the diagnostic services, message formats, and parameter definitions required to ensure interoperability across different vehicleā¦
The transition to zero emission vehicles (ZEVs) brings new challenges for on-board diagnostics. SAE J1979-3 (ZEVonUDS) addresses these challenges by defining diagnostic test modes specifically for electric, fuel cell, and other zero emission propulsion systems. Built upon the Unified Diagnosticā¦
SAE J1980-2011, first issued in 1990, is a foundational document that outlines test procedures for assessing the risk of injury to vehicle occupants who are out-of-position (OOP) relative to deploying frontal airbags. Developed by U.S. automotive manufacturers and suppliers, thisā¦
SAE J1966-2024 is the latest revision of the standard for non-dispersant lubricating oils used in four-stroke cycle piston aircraft engines. This standard replaces the former military specification MIL-L-6082 and outlines essential requirements for viscosity classification, testing protocols, and product qualification.ā¦
The SAE J1967 standard, revised in February 2021, establishes test procedures and performance requirements for retroreflective sheeting materials used to enhance the nighttime conspicuity of large vehicles such as truck tractors, trailers over 2032 mm in width and GVWR overā¦
The SAE J1978 (revised May 2022) standard defines the minimum capabilities for an OBD-II scan tool intended to communicate with OBD-compliant vehicles for emission-related diagnostics. Technically equivalent to ISO 15031-4, this recommended practice is essential for engineers designing generic testā¦
SAE J1962-2016 establishes the physical and electrical requirements for the on-board diagnostic (OBD) connector used in passenger cars and light to medium duty trucks. Originally developed to meet U.S. OBD regulations and later aligned with ISO 15031-3, this standard ensuresā¦