Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
Flares for tubing are essential components in fluid power systems, providing leak-free connections in hydraulic and pneumatic applications. SAE J533-2024, the latest revision of this long-standing standard, specifies dimensions, tolerances, and performance requirements for 37-degree and 45-degree single and doubleā¦
Scope and Key Applications SAE J526 covers electric-resistance welded (ERW) single-wall low-carbon steel pressure tubing designed for automotive, refrigeration, hydraulic, and general applications that demand formability and brazing capability. This tubing is produced from flat-rolled strip steel, formed into aā¦
SAE J529, originally issued in 1955, is a surface vehicle standard that specified requirements for fuel injection tubing in automotive applications. It covered dimensional tolerances, material properties, and testing procedures for metallic tubing used in fuel injection systems. In Decemberā¦
SAE J531-2020 is the latest revision of the long-standing standard that defines general and dimensional specifications for pipe, filler, and drain plugs used in automotive and related industrial applications. This article covers the key aspects of the standard, including threadā¦
SAE J524 is a cornerstone standard for seamless low-carbon steel pressure tubing that must withstand bending and flaring in hydraulic lines. It defines the manufacturing process, dimensions, tolerances, material composition, and quality requirements to ensure reliable, leak-free connections. In thisā¦
The SAE J525 standard specifies requirements for normalized electric-resistance welded, cold-drawn, single-wall, low-carbon steel pressure tubing. This tubing is intended for use as pressure lines and in applications requiring bending, flaring, forming, and brazing. The 2016 revision introduces recommendations forā¦
This article provides an overview of the SAE J518-2 standard for four-screw flange connections rated for 42 MPa (Code 62). The standard covers dimensional and material specifications for flanged heads, flange clamps, split flange clamps, and port designs used inā¦
This standard provides the general and dimensional specifications for two-screw flange clamps intended for low-pressure applications with SAE J518-1 (Code 61) four-screw flange connections. The clamps are also compatible with ISO 6162-1 port connections and flange heads. Standard Specifications andā¦
Standard Overview SAE J51‑2015 covers reinforced hose and hose assemblies for conducting liquid and gaseous dichlorodifluoromethane (refrigerant 12, R12) in automotive air‑conditioning systems. The hose must minimize refrigerant permeation and system contamination while operating reliably from –30 °C to 120 °C (–22 °F toā¦
The SAE J517-2020 standard provides critical specifications for the most common hydraulic hoses used in mobile and stationary equipment. This revision introduces important changes, including the discontinuation of certain hose types and updates to pressure ratings. Understanding these requirements isā¦