Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📐 Scope and Definitions This test method is applicable to electrical insulating liquids with a viscosity of 216 cSt or less at 100°C. It is designed to determine the gas content of such liquids, specifically nonacidic gases that are unreactiveā¦
ASTM D1828-01 (Reapproved 2021) establishes a standardized procedure for the direct exposure of adhesive-bonded joints and structures to natural atmospheric environments. This practice is strictly limited to the methodology of exposure setup and does not prescribe the specific tests usedā¦
📐 Scope, Terminology, and Applicability ASTM D1824 – 24, “Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates,” defines the protocol for measuring the flow properties of specialized dispersions. Under the jurisdiction of ASTM Committeeā¦
🔬 Scope and Significance of Standardized Etching ASTM D1825-03 outlines a controlled laboratory procedure for etching and cleaning copper-clad electrical insulating materials and thermosetting laminates intended for rigorous electrical testing. As detailed in Section 3.1, the etching process profoundly influencesā¦
ℹ️ Scope and Core Definitions ASTM D1826‑94 (Reapproved 2017), formally designated Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter, provides the definitive procedure for determining the total heating value of gaseousā¦
📐 Test Method and Specimen Setup This test method, designated D1822-21, covers the determination of the energy required to rupture standard tension-impact specimens of plastic materials. The energy is delivered by a single swing of a calibrated pendulum in aā¦
📐 Scope and Terminological Framework Standard D1823 − 24, under the jurisdiction of ASTM Subcommittee D20.15 on Thermoplastic Materials, defines a definitive test method for determining the apparent viscosity of plastisols and organosols under high shear rate conditions using anā¦
📐 Overview and Scope ASTM D1820-95 provides a standardized method for quantifying hydrolyzable chlorine compounds in chlorinated aromatic hydrocarbons, commonly known as askarels. The test measures chloride ions obtained after methanolic sodium hydroxide hydrolysis, reported in parts per million (ppm),ā¦
📐 Test Method Summary and Scope This test method, designated D 1821-95, covers the determination of inorganic chloride ions in askarels over the range of 0.02 to 100 ppm. The method employs potentiometric titration in an essentially nonaqueous medium toā¦
📐 Scope and Significance This standard, designated ASTM D1815‑00 (Reapproved 2021), covers the determination of the amount of water absorbed by leather at 23 ± 2 °C by immersion under static conditions. It is particularly adapted for vegetable‑tanned sole leatherā¦