Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🧪 Test Method Overview and Significance ASTM D1952 – 86 (Reapproved 1995) “Standard Test Method for Quantitative Determination of Break in Drying Oils” provides a procedure for measuring the amount of insoluble material, known as break, that forms in raw…
Test Method D 1954 – 86 (Reapproved 1995) defines a standard empirical volumetric procedure for determining foots (solid impurities) in raw linseed oil. This method utilizes specific reagents—including an acid-calcium chloride solution and acetone—to stratify suspended impurities in a graduated…
🔬 Overview and Significance of the Acetone Tolerance Test ASTM D1950 – 86 (Reapproved 1995)e1 defines a specialized test method for evaluating the acetone tolerance of heat-bodied drying oils. This standard is explicitly restricted to oils containing no nonfatty materials…
⚙️ Scope and Significance of the Ash Test This standard test method, designated ASTM D1951 – 86 (Reapproved 1995)e1, covers the determination of the residue or ash resulting from the ignition of natural and synthetic drying oils and their fatty…
🔬 Scope and Summary of the Method The ASTM D1945-14 (Reapproved 2019) standard provides a definitive test method for determining the chemical composition of natural gases and similar gaseous mixtures using gas chromatography. It covers a defined range of composition…
🧪 Scope and Components of Analysis ASTM D1946‑24 provides a standardized practice for determining the chemical composition of gaseous fuels. This practice specifically targets a defined set of components: hydrogen, oxygen, nitrogen, carbon monoxide, carbon dioxide, methane, ethane, and ethylene.…
📐 Specimen Scope and Applicability ASTM D1938-19 outlines the standard test method for determining the tear-propagation resistance of plastic film and thin sheeting using a single-tear (trouser tear) method. The standard specifically applies to materials with a thickness of 1…
📐 Scope and Significance of the Parshall Flume Test ASTM D1941 – 21 establishes a standardized procedure for measuring the volumetric flow rate of water and wastewater in open channels using the Parshall flume. Issued under the fixed designation D1941,…
📐 Scope and Key Specifications This standard test method D1943-20 covers the measurement of alpha particle radioactivity in water. It is applicable to nuclides emitting alpha particles with energies above 3.9 MeV and at activity levels above 0.02 Bq/mL (or…
⚙️ Test Methodology and Conditions ASTM D1934-20 outlines a standardized procedure for the accelerated oxidative aging of electrical insulating liquids using an open-beaker method. This test simulates the long-term thermal and oxidative stress that insulating liquids experience in service, particularly…