Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D2582-21 is the standard test method designed to measure the dynamic tear resistance of plastic film and thin sheeting when exposed to snagging-type hazards encountered in end-use applications. The test simulates the puncture and subsequent propagation of a tear,…
📋 Test Method Summary and Scope The ASTM D2579-93 standard specifies a test method for the determination of Total Organic Carbon (TOC) in a wide range of aqueous matrices, including water, wastewater, brackish waters, and brines. The explicitly stated working…
📐 Scope and Applicability ASTM D2580-06 (Reapproved 2012) defines a direct aqueous injection procedure for the gas-liquid chromatographic (GLC) determination of phenols, cresols, and mono- and di-chlorophenols in water. The test method is specifically applicable to waste waters and concentrates…
📝 Scope and Referenced Test Methods ASTM D2575-70 (Reapproved 1998) covers the selection and application of procedures for testing polymerized fatty acids. Rather than providing fully detailed procedures, it specifies the use of related ASTM standard test methods for critical…
🧪 Principle and Scope of D2578-23 ASTM D2578-23, “Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films,” specifies a procedure for measuring the surface energy of polyolefin films. This measurement is critical for predicting the adhesion of inks,…
The ASTM D2573/D2573M standard outlines the field vane shear test method for evaluating the undrained shear strength of saturated fine-grained soils. This test is critical for geotechnical engineering applications, particularly in clay and silt deposits. 📐 Scope and Applicability This…
🧪 Standard Test Method Overview and Scope ASTM D2574-16 (Reapproved 2024) provides a standardized protocol for evaluating the relative resistance of emulsion paints to microbial contamination within the container. This method is essential for assessing the efficacy of preservative systems…
📋 Scope and Significance This standard guide, designated as D2571-95, covers the evaluation of gloss or flatted, unpigmented lacquers designed for use on wood substrates. It is intended to be used in conjunction with Test Methods D 333 and includes…
🧪 Scope and Test Principle This test method, designated ASTM D2572-19, establishes a standardized procedure for determining the isocyanate group (—NCO) content in urethane intermediates or prepolymers. The percent NCO value is critical for ensuring correct stoichiometric ratios when formulating…
🧪 Test Objectives and Significance This test method evaluates the effect of a circulating engine coolant on metal test specimens and automotive cooling system components under controlled, essentially isothermal laboratory conditions. It provides a better evaluation and selective screening of…