Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D6100-17 is the governing standard for polyoxymethylene (POM) shapes, commonly known as acetal or Delrin®, fabricated through extrusion, compression molding, and injection molding processes. This specification ensures consistent material quality, dimensional accuracy, and mechanical integrity for sheet, plate, rod,ā¦
📐 Scope and Applicability The ASTM D6101-97 (Reapproved 2005) standard specifies an instrumental test method for determining the level of visible dirt in pulp, paper, and paperboard using image analysis. The method quantifies dirt specks in terms of Equivalent Blackā¦
📐 Overview and Significance of D610/SSPC-VIS-2 This standard practice covers the evaluation of the degree of rusting on painted steel surfaces. The degree of rusting is determined using a zero-to-ten scale based on the percentage of visible surface rust andā¦
📋 Scope and Summary of D6099-24 ASTM D6099-24 provides a standardized method for determining the acidity in aromatic isocyanate samples where the acidity level exceeds 100 parts per million (ppm), expressed as HCl. This test method is specifically applicable toā¦
ASTM D61-24 defines the standard test method for determining the softening point of pitches using the Cube-in-Water method. This procedure is critical for quality control and ensures consistency in materials that do not exhibit a true melting point. The standardā¦
📐 Scope and Classification ASTM D6098-16 provides a comprehensive classification system for extruded and compression molded shapes made from polycarbonate (PC). It applies specifically to plate, rod, and tubular bar used in mechanical grade applications. The standard outlines requirements forā¦
ASTM D6096-21 defines the material, physical, and electrical requirements for thermoplastic poly(vinyl chloride) (PVC) or vinyl chloride/vinyl acetate copolymer insulation designed for 90 °C conductor temperature operation. Governed by ASTM Subcommittee D09.07, this specification is essential for insulation used inā¦
📐 Specimen Geometry and Testing Conditions This standard specifies the use of compression-molded disk specimens, each featuring a precisely engineered conical defect. This defect is created by a sharp needle with an included angle of 60° and a tip radiusā¦
📐 Test Method Overview and Terminology The D6095-12 standard specifies a test method for measuring longitudinal volume resistivity of extruded crosslinked and thermoplastic semiconducting materials used in conductor and insulation shields. The key term “longitudinal volume resistivity” is defined asā¦
♻️ Overview and Scope ASTM D6094-97 (Reapproved 2004) provides a standardized guide to assess the compostability of environmentally degradable nonwoven fabrics. It outlines suggested criteria, procedures, and general approaches for evaluating whether these materials and products can effectively decompose inā¦