Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📐 Test Method Overview and Scope This standard test method, D613-24, covers the determination of the cetane number of diesel fuel oil using a standardized single cylinder, four-stroke cycle, variable compression ratio, indirect injected diesel engine. The cetane number scale…
📋 Test Overview and Scope This test method, designated D6129-97 (Reapproved 2021), covers the determination of silicon in the range from 200 ppm to 500 ppm in engine coolant concentrates by atomic absorption spectroscopy. It is as accurate and precise…
ASTM D6127-21 is a standard practice developed by ASTM Committee D26 on Halogenated Organic Solvents and Fire Extinguishing Agents. It provides essential guidelines for the handling, transportation, and storage of HFC-23 (Trifluoromethane, CHF3). This article outlines the key aspects of…
📐 Scope and Measured Properties ASTM D6128-22, under the jurisdiction of Subcommittee D18.24 on Characterization and Handling of Powders and Bulk Solids, specifies the apparatus and procedures for measuring the cohesive strength of bulk solids. The test method measures strength…
🔍 Scope and Application of D6126/D6126M-21 ASTM D6126/D6126M-21 defines the minimum quality requirements for HFC-23 (Trifluoromethane, CHF3) intended for use as a gaseous fire fighting medium. The scope of this specification is strictly confined to the chemical and physical purity…
ASTM D6125-97 (Reapproved 2007) provides a comprehensive procedure for quantifying the bending resistance of paper and paperboard using a Gurley Type Tester. This method is critical for process control, converting operations, and end-use performance prediction. The instrument’s flexibility in specimen…
📐 Tape Types and Applications This specification covers paper-backed pressure-sensitive tapes designed for light-duty packaging and general-purpose masking. These tapes are intended for applications such as bundling small parts for overpacking, holding components to assemblies, temporary closure of chipboard or…
🧪 Overview of Test Methodologies The standard defines two distinct procedures tailored to the glove type. Procedure I is intended for gloves labeled as non-powdered, powder-free, powderless, or equivalent terminology. Procedure II is designed for powdered gloves, where the filter-retained…
🔍 Validation Process Overview Standard D6122-23 establishes requirements for validating the performance of multivariate online, at-line, field, and laboratory infrared and Raman spectrometer based analyzer systems used for liquid petroleum products and fuels. The practice focuses on the third, fourth,…
🔧 Test Equipment and Axle Configuration The ASTM D6121‑19 standard, commonly referred to as the L‑37 test, evaluates the load‑carrying capacity of a gear lubricant in a hypoid drive axle under low‑speed, high‑torque conditions. The test utilizes a Dana/Spicer Model…