Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D6074 – 15 (Reapproved 2022) outlines essential physical, chemical, and toxicological tests for characterizing hydrocarbon lubricant base oils derived from crude refining or re-refined used oils. It provides a framework for describing parameters affecting lubricant performance and safe handling,…
ASTM D6075-13 (Reapproved 2020) establishes a standardized test method for evaluating the cracking resistance of leather when subjected to bending or folding. This method is essential for assessing the durability of leather used in applications ranging from heavy industrial products…
🧪 Scope and Principle of the Setting Test This test method, designated D6073, describes the procedure for determining the relative setting speed of heatset printing inks using a forced hot air oven and print delivery system. It is applicable to…
🔬 Test Method Overview This test method, ASTM D6071-14 (Reapproved 2022), is designed for determining trace sodium in high purity water using graphite furnace atomic absorption spectroscopy. It covers a concentration range of 1 to 40 µg/L sodium, with the…
ASTM Standard D6072/D6072M −19 (Reapproved 2024) provides the definitive procedures for obtaining samples of Geosynthetic Clay Liners (GCLs) for subsequent laboratory testing. These methods are engineered to ensure that the samples received by a testing laboratory are truly representative of…
ASTM D6070-02 (Reapproved 2010) defines standard methods for assessing the environmental performance of smooth-wall, coilable polyethylene (PE) conduit used in preassembled wire and cable applications. These tests provide critical data for quality control, engineering design, and specification compliance, focusing specifically…
📐 Composition and Grade Specifications ASTM D607-82 (Reapproved 2019) establishes the requirements for wet ground muscovite mica pigments intended for use in protective coatings. This standard defines two specific grades based on particle fineness: Type A (Regular 325 M Grade)…
📐 Specimen Geometry and Types ASTM D6068-10 specifies two primary bend-type specimen configurations for generating J-R curves in polymeric materials: the three-point bend (SE(B)) specimen and the pin-loaded compact tension (C(T)) specimen. Both configurations are designed with in-plane dimensions of…
🧪 Scope and Application This test method is specified for the determination of total nitrogen (both organic and inorganic) in aromatic hydrocarbons, their derivatives, and related chemicals. It is applicable for nitrogen concentrations in the range of 0.3 to 2…
🌍 Scope and Purpose for Environmental Site Characterization The electronic cone penetrometer test is frequently used to determine subsurface stratigraphy for geotechnical and environmental purposes. However, ASTM D6067/D6067M-17 specifically addresses the unique facets of this test when applied to environmental…