Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D6083/D6083M-24 is a standard specification for liquid-applied water-dispersed acrylic latex elastomeric protective roof coatings. It establishes requirements for two types of coatings—Type I and Type II—based on liquid and cured film physical properties, ensuring reliable performance in roofing applications.…
ASTM D6084/D6084M is a standard test method that evaluates the elastic recovery of asphalt materials using a ductilometer. This test is crucial for understanding the material’s ability to recover from deformation, which is a key indicator of performance in pavement…
📐 Scope and Methodology Overview ASTM D6082–23, formally designated as the Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils, establishes a dedicated procedure for evaluating the foaming tendencies of lubricating oils at an elevated temperature of 150…
📐 Scope and Applicability This practice covers all hydraulic fluids based on petroleum, synthetic, or naturally-occurring base stocks. It is not intended for water-containing hydraulic fluids. The practice is applicable to fluids with a kinematic viscosity ranging from approximately 4…
This standard practice, D6081-22, provides guidelines for preparing lubricants and their components for aquatic toxicity testing. It is specifically designed for materials that are not completely soluble at the intended test treat rates, ensuring that the test results are representative…
📜 Standard Scope and General Requirements ASTM D608-05 (Reapproved 2019) defines the requirements for dibutyl phthalate (DBP) of 99% grade. This specification is essential for applications in paints, varnishes, lacquers, and plastics where DBP serves as a plasticizer and solvent.…
🛢️ Scope and Applicability of D6079–24 ASTM D6079–24, approved December 1, 2024, specifies the standard procedure for evaluating diesel fuel lubricity with the High-Frequency Reciprocating Rig (HFRR). Under Subcommittee D02.E0, it covers middle distillate fuels from Specification D975, including Grades No. 1‑D…
ASTM D6077-16 (Reapproved 2023) provides a standardized test method for measuring the Trapezoid Tearing Strength of Leather. This method covers the determination of the tearing load using the trapezoid configuration, assessing the nonwoven structure of the material. Per the standard,…
ASTM D6078 – 04 (Reapproved 2016), formally titled “Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE),” provides a standardized methodology for assessing the load-carrying capacity of diesel fuels under boundary lubrication…
📐 Scope and Significance of D6076-18 The ASTM D6076-18 (Reapproved 2023) standard provides a definitive test method for determining the shrinkage temperature of all types of leather. The values stated in SI units are regarded as the standard. The selection…