Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📐 Scope, Purpose, and Application Range D5173‑15 (Reapproved 2023) provides comprehensive guidance for the selection, establishment, and application of on‑line Total Organic Carbon (TOC) monitoring systems utilizing automated analysis and data recording. The system chosen will depend on the intended…
📝 Purpose and Scope of Standard Operating Procedures ASTM D5172-91 is a guide that addresses the need for laboratories conducting water and wastewater analysis to develop and maintain an up-to-date written manual of standard operating procedures (SOPs). This manual must…
🧪 Scope and Significance of the Peel Strength Test Standard D5170-98 (Reapproved 2021) defines the “T” method for measuring the peel strength of hook and loop touch fasteners using a recording constant-rate-of-extension (CRE) tensile testing machine. This test quantifies the…
ASTM Designation D5171-15 (Reapproved 2020) defines the standard test method for evaluating the impact resistance of plastic sew-through buttons. This procedure is critical for quality assurance in the textile and apparel industry, ensuring buttons can withstand the mechanical stresses of…
📜 Material Composition and Classification ASTM D517-23 outlines the specification for asphalt plank, a robust composite material engineered for demanding environments such as bridge decks and industrial floors. The standard defines the composition, which must include a mixture of asphalt…
ASTM D5168-22 provides a standardized practice for the fabrication and closure of new triple-wall corrugated fiberboard containers. This practice is crucial for ensuring the structural integrity and performance of shipping containers in various industries. The standard is under the jurisdiction…
ASTM D5169-98 (Reapproved 2021) provides a standardized procedure for determining the shear strength of hook and loop touch fasteners using a dynamic, constant rate of extension (CRE) method. This test method is essential for evaluating the in-plane load resistance of…
The ASTM D5167-13 (Reapproved 2024) standard, under the jurisdiction of Committee D04 on Road and Paving, establishes a critical and uniform practice for melting and heating hot-applied joint and crack sealants and fillers. This procedure is specifically designed to prepare…
📐 Scope and Significance of D5166-97 This standard practice, designated D5166‑97 (Reapproved 2016), provides a standardized procedure for the laboratory preparation of gelled vehicle samples using a microwave oven. The primary purpose is to characterize the gelability or reactivity of…
📋 Scope, Referenced Documents, and Property Requirements The ASTM D5164-05 (Reapproved 2019) standard provides the material property requirements, test methods, and packaging guidelines for Propylene Glycol and Dipropylene Glycol used primarily in the preparation of surface coatings. Under the jurisdiction…