Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🏷️ Scope and Application These test methods (D5155-19) are designed to measure the isocyanate content of aromatic isocyanates used as polyurethane raw materials. They cover three distinct test methods: Test Method A for refined toluene diisocyanate (TDI), Test Method Bā¦
🧪 Scope and Summary of Test Method ASTM D5153-22 provides a standardized procedure for the quantitative determination of palladium (Pd) in fresh, molecular sieve-containing catalysts. This test method is specifically validated for catalyst compositions containing approximately 0.5 weight percent palladium.ā¦
The ASTM D5154/D5154M-18 standard provides a definitive microactivity test method for evaluating the performance of Fluid Catalytic Cracking (FCC) catalysts. Designed for both equilibrium and laboratory-deactivated catalysts, the test measures catalytic activity via mass percent conversion of a specified gasā¦
ASTM D5152-91, officially titled Standard Practice for Water Extraction of Residual Solids From Degraded Plastics for Toxicity Testing, provides a standardized laboratory protocol for leaching residual solids from degraded plastics. The resulting aqueous solution (extract) is specifically intended for useā¦
🧪 Overview and Significance of ASTM D5151-19 ASTM D5151-19 (Reapproved 2023) is the standard test method for detecting holes in medical gloves, covering both surgical and examination glove types. This globally recognized procedure (developed under WTO TBT principles) serves asā¦
Standard D515-88 specifies two test methods for determining phosphorus in water and wastewater: Method A (Colorimetric Ascorbic Acid Reduction) and Method B (Semiautomated Digestion/Colorimetric Ascorbic Acid Reduction). These methods are specific for orthophosphate and cover various forms of phosphorus, includingā¦
📐 Scope and Significance This test method, standardized under ASTM D5150-24, measures the ability of architectural paints to hide or obscure a surface when applied by a practical roller application. It is designed to simulate real-world application conditions, providing aā¦
ASTM D5149-24 establishes the standard test method for the continuous sampling and analysis of ambient ozone concentrations. Utilising the ethylene chemiluminescence reaction, this method provides near real-time data for concentrations ranging from 20 µg/m³ to 2000 µg/m³ (10 ppb(v) toā¦
📐 Scope and Referenced Documents ASTM D5147/D5147M‑18 (Reapproved 2024) establishes procedures for sampling and testing prefabricated, reinforced, polymer‑modified bituminous sheet materials used in roofing and waterproofing. The standard covers products with various surfacing options and reinforcement types, including SBS andā¦
🧪 Test Overview and Scope The Centrifuge Kerosine Equivalent (CKE) test, designated under ASTM D5148-10, is a fundamental method for characterizing the surface properties and absorptive behavior of aggregates intended for use in bituminous mixtures. This standardized procedure supports theā¦