Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📋 Scope and Application of D5146-10 ASTM D5146-10 provides a standard guide for testing solvent-borne architectural coatings used on exterior, interior, or both surfaces. These coatings are defined as organic coatings applied on-site to residential, commercial, institutional, or industrial buildings…
📖 Scope, Significance, and Summary ASTM D5145-09 (Reapproved 2021) defines test methods for the gravimetric determination of nonvolatile matter content and inorganic pigment content in electrocoat baths. Standard SI units apply throughout. These properties are essential for maintaining bath quality…
ASTM D5143-06 (Reapproved 2015) defines a standardized laboratory procedure for the quantitative determination of seven specific nitroaromatic and nitramine explosive compounds in soil using High Performance Liquid Chromatography (HPLC). This test method is critical for environmental site assessments, remediation monitoring,…
Protective coatings (paints) have been used extensively in the nuclear industry to protect the surfaces of facilities and equipment from corrosion and contamination by radioactive nuclides in accordance with ALARA principles. Historically, the lack of a standardized method for selecting,…
🏛️ Scope and Referenced Standards ASTM D5142-09 specifies instrumental test methods for conducting the proximate analysis of the analysis sample of coal and coke. This standard covers the determination of moisture, volatile matter, and ash, along with the calculation of…
📐 Specimen Preparation and Geometry Per ASTM D5140-95, test samples representing polyurethane “poured in place” thermal break materials are prepared in an aluminum mold strictly in accordance with the manufacturer’s recommended procedures. The standard guide specifies a recommended mold size…
📐 Scope and Principle of the Test Method ASTM D5141 – 23, developed under the jurisdiction of Committee D35 on Geosynthetics and Subcommittee D35.03 on Permeability and Filtration, establishes a standardized test method for determining the filtering efficiency and flow…
📋 Scope and Purpose of ASTM D5139-19 ASTM D5139-19 provides the governing framework for preparing test specimens used in the qualification of protective coatings and linings for nuclear power plants. The specification precisely defines the size, composition, surface preparation, and…
📊 Properties and Specification Requirements Hexyl acetate conforming to ASTM D5137-07 (2021) must meet specific compositional and physical limits to ensure its efficacy as a high-boiling active solvent in industrial coatings. The standard details strict requirements for purity, distillation behavior,…
This article provides an overview of ASTM D5138‑23, the standard classification system for liquid crystal polymer (LCP) materials used in molding and extrusion. 📐 Classification and Scope ASTM D5138‑23 establishes a classification system for liquid crystal polymer (LCP) materials intended…