Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📜 Scope and Key Definitions of D5201-05a ASTM D5201-05a (Reapproved 2020) provides a standardized practice for calculating essential formulation physical constants of liquid paints and coatings. These constants include weight solids, volume solids, solvent content, volatile organic compound (VOC) content,…
ASTM D5200-03 (Reapproved 2021) provides a definitive test method for determining the weight percent volatile content of solvent-borne paints in aerosol cans. It overcomes the challenges of pressurized containers, offering a standardized approach for regulatory compliance and quality assurance. This…
📐 Scope and Applicability of D5199 ASTM D5199‑12 (Reapproved 2019) provides a standardized framework for measuring the nominal thickness of geosynthetics. As outlined in Section 1.1, this test method is applicable to most geosynthetic materials, with the notable exception of…
ASTM D520-00 (Reapproved 2019) specifies three types of zinc dust pigment for paints. The standard ensures that the pigment consists essentially of metallic zinc and meets defined composition and physical property requirements. It is governed by ASTM Committee D01 and…
🧪 Scope and Summary of the Practice ASTM D5198-17 (Reapproved 2024) defines a standard practice for the partial digestion of solid waste using nitric acid. This method is designed specifically for the subsequent determination of total recoverable inorganic constituents. It…
ASTM D5197-21 establishes a standardized procedure for the determination of formaldehyde and other carbonyl compounds in air using active sampler methodology. This method is widely applied in indoor air quality investigations, industrial hygiene assessments, and environmental monitoring, functioning as a…
ASTM D5195−21 specifies a nuclear method for determining the in-place wet density of soil and rock at depths below the surface. This standard, under the jurisdiction of ASTM Committee D18, calculates the wet density by comparing the detected rate of…
🧪 Introduction and Scope of D5196-06 ASTM D5196-06 (Reapproved 2018) provides a comprehensive guide for the chemical, physical, and biological characteristics of water intended for critical laboratory bio-applications. This includes sensitive fields such as clinical analysis, pharmaceutical research, molecular biology,…
🧪 Scope and Principle of the Method Chloride contamination, even at trace levels, acts as a potent catalyst poison and can cause severe pitting corrosion in stainless steel equipment used for aromatic hydrocarbon processing. ASTM D5194‑24a provides the definitive wet…
📐 Specimen Requirements and Geometry According to ASTM D5193, three circular test specimens must be accurately cut from the coated fabric. Each specimen shall have a diameter of 330 ± 3 mm [13 ± 0.1 in.] and a thickness of…