Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
SAE Standards Interpretation
SAE J2287 is a recommended practice that provides design and performance criteria for vehicle seats with integrated lap and shoulder restraint systems. This standard, first issued in 1999 and stabilized in 2012, defines the requirements for attachment points, structural integrity,…
SAE J2293-1 establishes the functional framework for electric vehicle (EV) energy transfer systems, covering both conductive and inductive coupling methods. This stabilized recommended practice serves as an umbrella document that defines common functional requirements while accommodating three distinct physical system…
SAE J2283 is a surface vehicle standard that defines the mechanical and material requirements for one-piece wheel nuts used in automotive applications. First issued in 1996, this standard has been stabilized by the SAE Wheel Standards Committee, meaning it is…
Introduction to SAE J2284-1 SAE J2284-1, stabilized in 2023, defines a standardized approach for implementing a 125 kbps vehicle communication network using the Controller Area Network (CAN) protocol. The primary goal is to establish a common Electronic Control Unit (ECU)…
Understanding SAE J2286-2015 SAE J2286-2015 is a stabilized recommended practice that defines the file-based interface between the OEM Shop Floor Program and the Vendor Component Program. Its primary purpose is to document existing systems and establish a consistent framework for…
SAE J2270-2016 provides comprehensive guidance for the inspection, testing, and installation of threaded fasteners used in ship systems and equipment. Revised in 2016 to align with current Navy standards, this document replaces the 2003 version and includes extensive updates to…
SAE J2271 (May 2009) is the definitive parts standard for continuous thread and double end studs used in ship systems and equipment. This inch-series standard covers dimensions, materials, coatings, and a comprehensive part numbering system to ensure consistency and reliability…
The SAE J2276 Recommended Practice establishes a consistent alphanumeric numbering system for two-diameter (one step) cutting tools. Designed to reduce ambiguity in identification, procurement, and inventory management, the system uses a 30- or 40-position code to describe dimensions, type, material,…
This article provides an overview of SAE J2255-2024, a recommended practice for measuring the air consumption of highway vehicles equipped with Antilock Brake Systems (ABS) and air brakes. The standard applies to truck tractors, buses, trailers, and dollies, and outlines…
The SAE J2266 standard, formally known as the Location Referencing Message Specification (LRMS), provides a structured framework for encoding location references within Intelligent Transportation Systems (ITS). Published in 2019 and stabilized due to the lack of identified active users, this…
