Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
SAE Standards Interpretation
Overview of the SAE J18 Standard SAE J18 is a recommended practice that defines tests and classification for flexible cellular rubber products, commonly known as sponge rubber and expanded rubber. First issued in 1952, it was cancelled in 2006 because…
The latest revision of SAE J180 introduces critical updates for alternator design and application in off-road work machines. Serving as a comprehensive resource for engineers and system integrators, the standard covers mounting configurations, performance criteria, and special conditions like batteryless…
SAE J1794 is a stabilized recommended practice that defines a test procedure for measuring gaseous and particulate effluent from airbag inflators during deployment. This standard provides a consistent basis for comparing different inflator designs and validating safety performance. 🛠️ Overview…
The SAE J1796–2020 standard defines a test method for measuring the direct solar and visible transmittance of safety glazing materials used in road vehicles. It provides a consistent procedure to evaluate clear or tinted, monolithic or laminated glazing. This standard…
The SAE J1798/2_202412 standard provides a comprehensive framework for evaluating the electrical performance of lithium-ion battery modules (LIBM) used in xEV battery packs and other applications. Published in December 2024, this recommended practice standardizes test procedures for capacity, energy, fast-charging,…
Self-propelled sweepers and scrubbers used in industrial and municipal settings often need to be operated from either side of the machine. SAE J1791 (reaffirmed 2022) establishes the requirements for designing, constructing, and ensuring the safety of dual position driving controls…
SAE J1793-2021 provides a uniform methodology for rating the capacities of debris hoppers and fluid tanks on self-propelled sweepers and scrubbers. By establishing consistent definitions for struck volume, heaped volume, and rated capacity, the standard ensures that equipment comparisons across…
Understanding the Scope and Status SAE J1773-2014 is a SAE Recommended Practice that specifies the interface requirements for inductively coupled charging of electric vehicles. It covers the connection between the inductive connector (charger side) and the vehicle inlet, including power…
Overview and Scope SAE J178-1998 is a recommended practice covering high-quality, hard-drawn steel spring wire intended for the manufacture of springs and wire forms subjected to high stresses or requiring good fatigue properties. It also specifies processing requirements for springs…
Determining the ash content of aviation piston engine oils is critical for ensuring engine cleanliness and performance. Traditional methods like ASTM D 482 often lack precision for low-ash formulations (≤0.011%). Enter SAE J1787, an empirical calculation method that uses elemental…
The SAE J1770 standard, issued in 1995 and cancelled in November 2010, established critical minimum requirements for recovery/recycling equipment intended for use with both R12 and R134a refrigerants in a common circuit. Its primary goal was to ensure that such…
The latest revision of SAE J1772 introduces critical refinements to the foundational North American EV conductive charging standard. This document serves as a detailed guide for engineers and designers navigating the updates to safety, performance, and global harmonization. 🔍 Key…