Category ASTM Standards

🔬 Scope and Summary of the Freezing Point Method ASTM D3799-95 provides a standardized procedure for determining the purity of styrene, expressed as a weight percent. As stated in Section 1.1, all detectable impurities encountered during analysis are systematically treated…

📐 Scope and Applicability ASTM D3796-09 (Reapproved 2024) defines the standard practice for the calibration of Type S pitot tubes. This practice is specifically applicable to the determination of Type S pitot coefficients within the gas velocity range of 305…

🔬 Scope and Applicability of D3797-05 ASTM D3797-05 specifies a standard gas chromatographic test method for analyzing the purity of o-xylene and quantifying its normally occurring impurities. The impurities covered in this test method include nonaromatic hydrocarbons, benzene, toluene, p–…

🔍 Scope and Purpose of D3795-20 ASTM D3795-20 specifies a standardized methodology for determining the thermal flow, cure, and behavior properties of pourable thermosetting materials using a torque rheometer. The test method is employed as a critical tool for development,…

🧪 Test Overview and Scope ASTM D3793-06, formally titled the “Standard Test Method for Low-Temperature Coalescence of Latex Paint Films by Porosity Measurement,” provides a comparative procedure for evaluating the film-formation ability of latex paints. The method specifically measures the…

🎯 Scope and Application of D3794-22 ASTM D3794-22, the Standard Guide for Testing Coil Coatings, provides a consolidated framework for evaluating the performance of organic coatings applied to metal coils prior to fabrication. This standard is essential for the pre-painted…

📐 Scope and Significance of Heat Evaluation ASTM D3791 / D3791M provides a standardized procedure for evaluating the effects of heat on asphalts when they are maintained at elevated temperatures in the presence of little or no air. The practice…

ASTM D3792 – 16 (Reapproved 2022) establishes a direct injection gas chromatographic (GC) method for determining the total water content in waterborne paints. This test method is a critical tool for calculating Volatile Organic Content (VOC) and has been evaluated…

📐 Scope and Referenced Documents This standard, designated D3787 – 16 (Reapproved 2020), specifically covers the measurement of bursting strength for textiles and garments that exhibit a high degree of ultimate elongation using a Constant-Rate-of-Traverse (CRT) ball burst strength tester.…

ASTM D3790-24 defines the standard procedure for determining the volatile matter (moisture) content in all types of leather. This determination is critical for reporting the results of other chemical tests on a moisture-free basis. 📐 Scope, Significance, and Required Apparatus…

📜 Scope and Material Applicability ASTM D3785-20 defines the standard performance specification for woven necktie and scarf fabrics. It applies to fabrics made from any textile fiber or mixture of textile fibers (Section 1.1). The requirements apply to both the…

📐 Scope and Key Terminology This test method (D3786/D3786M −18 (Reapproved 2023)) describes the measurement of the bursting strength of textile fabrics using a hydraulic or pneumatic diaphragm bursting tester. It is generally applicable to a wide variety of textile…