Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM Standards Interpretation
The ASTM D3808-01 (Reapproved 2021) standard, officially titled Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion, defines a rapid screening tool widely used in the adhesives industry. Under the jurisdiction of Subcommittee D14.40…
ASTM D3806-19a, the Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method), establishes a bench-scale procedure to evaluate how a coating protects its substrate and assesses its comparative burning characteristics. Per Section 1.1, it evaluates the flame…
🧪 Summary of Test Method and Scope ASTM D3804-02 (Reapproved 2021) is a standard titrimetric test method for determining the iron content in liquid iron driers used in the coatings industry. The method is specifically designed for samples soluble in…
📜 Scope, Significance, and Key Substrates ASTM D3805/D3805M −16 (Reapproved 2023) provides a standardized guide for the application of aluminum-pigmented asphalt roof coatings. This guide is specifically written for products conforming to ASTM D2824/D2824M (Aluminum-Pigmented Asphalt Roof Coatings, Non-fibered, and…
📐 Scope and Terminology This test method, designated D3802‑23, provides a procedure for determining the ball‑pan hardness number of granular activated carbons. It is applicable to carbons where 90 % of particles exceed 80 mesh (180 µm) as per Test…
🎯 Scope and Significance ASTM D3803 −91 (Reapproved 2022) defines a highly stringent procedure for evaluating the capability of nuclear-grade activated carbon to remove radio-labeled methyl iodide from air and gas streams. The test method is designed for dual application:…
The density of high-modulus fibers is a critical property influencing the specific mechanical performance of composite materials. ASTM D3800M-11 provides two standardized procedures to determine this property. This standard is under the jurisdiction of ASTM Committee D30 on Composite Materials…
📐 Specimen Geometry and Test Setup This fire-test-response standard defines a small-scale laboratory procedure for determining the comparative burning characteristics of solid plastics in a vertical position. A 20-mm (50W) premixed flame is applied to the base of the specimen,…
📐 Scope and Standard Overview Designation D3800-22, officially titled “Standard Test Method for Density of High-Modulus Fibers,” is a critical standard under the jurisdiction of ASTM Committee D30 on Composite Materials. It provides standardized procedures for determining the density of…
📏 Scope and Applicable Materials ASTM D38-94 (Reapproved 2000) establishes standardized test methods for sampling wood preservatives prior to laboratory testing. The methods are specifically designed for creosote, creosote-coal tar solutions, creosote-petroleum solutions, as well as oilborne and waterborne preservatives.…
ASTM D380-94 (Reapproved 2020) is a standard test method for rubber hose, approved for use by the U.S. Department of Defense. It covers inspection and testing of all types and constructions of rubber hose. The values stated in SI units…
ASTM D3798-03, formally titled Standard Test Method for Analysis of p-Xylene by Gas Chromatography, defines a rigorous protocol for determining the hydrocarbon impurity profile and calculating the chromatographic purity of high-grade p-xylene. Developed under the jurisdiction of ASTM Committee D16,…