Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🎯 Scope and General Requirements ASTM D1153-22 defines the specification for methyl isobutyl ketone (MIBK, 99.0 % grade), also known chemically as 2-methyl-4-pentanone. This standard is essential for ensuring quality in solvent applications, particularly within the paint, varnish, lacquer, andā¦
📋 Overview and Scope ASTM D1155-10 (Reapproved 2020) is a standard test method issued under the jurisdiction of ASTM Committee D01 on Paint and Related Coatings. It specifically covers the determination of the percent of true spheres in glass spheresā¦
ASTM D1157-23 specifies the standard procedure for determining the total concentration of p-tertiary-butylcatechol (TBC) in light hydrocarbons, specifically butadiene and mixed C₄ streams. This inhibitor is critical for preventing oxidation during storage and transport. The method provides reliable quantification withinā¦
🧪 Scope and Significance ASTM D1151‑00 (Reapproved 2022), formally titled Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds, defines the standard conditions for evaluating how adhesive bonds perform under continuous environmental stress. The primary metric is theā¦
🧪 Product Specifications and Key Properties ASTM D1152-24 defines the standard for Methanol (99.85% grade), also known as methyl alcohol. This specification serves as a general quality benchmark for a chemical produced through a wide variety of feedstocks and processes.ā¦
🔬 Introduction to D1149-18 Standard Test Methods D1149-18 for Rubber Deterioration—Cracking in an Ozone Controlled Environment provides a framework to assess the impact of ozone on rubber materials under surface tensile strain. These methods apply to vulcanized rubber, compounds, andā¦
ASTM D115-17 (Reapproved 2024) provides standardized test methods for solvent-containing varnishes used in electrical insulation. These varnishes are essential for protecting electrical equipment by imparting electrical, mechanical, and chemical resistance. The standard encompasses tests for both control and performance, coveringā¦
📐 Specimen Geometry and Types This practice recommends the use of lap-type shear specimens conforming to Test Method D1002. These specimens are ideal for metal-to-metal adhesive bonds but can be adapted for other materials such as plastics, woods, glass, orā¦
ASTM D1146-00 (Reapproved 2018) is a standard test method for determining the blocking point of thermoplastic or hygroscopic layers or coatings of potentially adhesive material. This method simulates moderate pressures and environmental exposures typical of storage conditions to assess theā¦
ASTM D1148-13 (Reapproved 2018) provides a standardized technique for evaluating the surface discoloration of white or light-colored vulcanized rubber when subjected to ultraviolet (UV) or UV/visible radiation under controlled conditions of relative humidity, moisture, and heat. Jointly developed by theā¦