Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D1190-97 establishes the material requirements and testing procedures for hot-applied elastic joint sealants used in portland cement and asphaltic concrete pavements. Governed under the fixed designation D 1190, this specification ensures sealants can repeatedly withstand thermal expansion and contractionā¦
📐 Scope and Significance of Test Methods ASTM D1185-98 (Reapproved 2017) provides standardized test methods for evaluating pallets and related structures used in materials handling and shipping. These test methods are designed to measure the relative resistance of pallets toā¦
📋 Overview and Scope ASTM D1186-01 provides standard test methods for nondestructive measurement of dry film thickness of nonmagnetic coatings on ferrous bases. It covers two methods: Test Method A using mechanical magnetic pull-off gages and Test Method B usingā¦
🛡️ Scope and Classification of Asphalt-Base Emulsions This specification covers emulsified asphalt suitable for application in a relatively thick film as a protective coating for metal surfaces. It distinguishes between two service types based on their setting characteristics and environmentalā¦
ASTM D1183-03 (Reapproved 2019) outlines standardized practices for assessing the resistance of adhesives to cyclic laboratory aging conditions. By exposing bonded specimens to fluctuating temperatures and humidity levels, this method helps evaluate the durability of adhesive joints under accelerated service-likeā¦
This test method, designated ASTM D1184-98 (Reapproved 2020), covers the determination of comparative flexural properties of metal or wood adhesive bonded assemblies. Using standard shape specimens and defined conditions of pretreatment, temperature, relative humidity, and testing technique, the method isā¦
ASTM D1177-22, under the jurisdiction of Committee D15 on Engine Coolants and Related Fluids, establishes a standardized laboratory procedure for determining the freezing point of aqueous engine coolant solutions. This measurement is a primary indicator of a coolant’s freeze protectionā¦
ASTM D1179-16 (Reapproved 2021) provides standardized test methods for the determination of fluoride ion in water. Approved for use by agencies of the U.S. Department of Defense, this standard encompasses two principal analytical procedures: Test Method A (Distillation) and Testā¦
ASTM D1172-15 (Reapproved 2024) provides a standardized methodology for preparing aqueous solutions of soaps and detergents and measuring their pH. This guide is critical for ensuring consistent product quality and compliance with regulatory standards. 🧪 Reagent Requirements and Preparation Theā¦
📐 Apparatus and Critical Dimensions The ASTM D1173-23 standard specifies a highly controlled apparatus to ensure repeatability in evaluating the foaming properties of surface-active agents. The test relies on two primary glass components: the pipet and the receiver. The pipetā¦