Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📐 Types and Classes of Rubber Insulating Gloves ASTM D120-22 specifies rubber insulating gloves for worker protection from electrical shock. Two types are defined: Type I is non-resistant to ozone, while Type II is resistant to ozone. Six classes, Class…
📐 Scope and Apparatus Specifications ASTM D1200-23 describes the standard test method for determining the viscosity of Newtonian or near-Newtonian paints, varnishes, lacquers, and related liquid materials using the Ford-type efflux viscosity cup. For non-Newtonian materials such as shear-thinning or…
📐 Scope and Significance The ASTM D1198 – 93 (Reapproved 1998) standard specifically covers the determination of the hydrocarbon solvent tolerance of amine resins at a controlled temperature of 77°F (25°C). This critical measurement provides a direct indication of a…
📋 Scope and Classification of Calcium Carbonate Pigments The ASTM specification D1199-86 (Reapproved 2020) defines the requirements for high-content calcium carbonate pigments for use in paints and related coatings. Approved for use by agencies of the U.S. Department of Defense,…
The ASTM D1195/D1195M-21 standard provides a comprehensive methodology for conducting repetitive static plate load tests. Designed to evaluate the structural strength and deformation characteristics of subgrade soils and compacted pavement components, this test method is essential for the rigorous evaluation…
The ASTM D1196/D1196M – 24 standard provides a comprehensive methodology for conducting nonrepetitive static plate load tests on subgrade soils and flexible pavement components. This test method is instrumental in generating data for evaluating the structural capacity and designing rigid…
The ASTM D1192–98 standard provides a comprehensive guide covering the commonly used equipment for sampling water and steam within closed conduits. This guide establishes essential terminology and references critical specifications for components such as valves, fittings, piping/tubing, and cooling systems,…
ASTM D1193-24 is the standard specification that defines the required characteristics for reagent water used in analytical measurement processes under the jurisdiction of ASTM International. The specification covers four distinct types of water (Types I, II, III, and IV) with…
📐 Scope and Significance of Standard D1194-94 The ASTM D1194-94 standard test method covers the estimation of the bearing capacity of soil in place by means of field loading tests. It is used as part of a procedure for soil…
ASTM D1188/D1188M -22 addresses the determination of bulk specific gravity for compacted asphalt mixtures that absorb water or possess open/interconnecting voids. Unlike methods for dense, non-absorptive specimens, this standard requires a paraffin coating to seal the sample, ensuring accurate volume…