Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D2756-24 provides a definitive test method for measuring the weight loss of cured electrical insulating varnishes when exposed to elevated temperatures in an air-circulating environment. This property is a critical indicator of thermal stability and the potential for volatileā¦
📐 Tape Types and Grades This specification defines two types of high-temperature glass cloth pressure-sensitive electrical insulating tape. Type I is woven glass cloth with silicone adhesive, available in Grade A (0.18 mm) and Grade B (0.25 mm). Type IIā¦
The ASTM D2751-05 standard defines the requirements for acrylonitrile-butadiene-styrene (ABS) sewer pipe and fittings used in nonpressure drainage systems. This specification covers materials, dimensions, workmanship, and various performance tests to ensure reliability in sewer applications. 📐 Material Composition and Classificationā¦
📐 Overview and Scope of ASTM D2752/D2752M ASTM D2752/D2752M −88 (Reapproved 2019) specifies standardized test methods for measuring the relative degree of openness, or degree of fiberization, of milled asbestos fibers using air permeability instruments. The standard is under theā¦
📐 Scope and Significance of the Stain Index Test This standard, ASTM D2746/D2746M‑18 (Reapproved 2023), covers the determination of the staining tendency of asphalt and the assignment of a Stain Index proportional to the extent of staining observed. The methodā¦
📐 Overview and Scope ASTM D2749-22 establishes standard symbols for dimensions of pipe fittings made of plastic materials. It provides a comprehensive list of letter designations with definitions, accompanied by drawings of typical fittings to illustrate dimension placements. This standardā¦
📐 Scope and Applicability These practices (ASTM D2743‑68) provide general information on instrumental techniques, including infrared and ultraviolet spectroscopy and gas chromatography, for detecting adulteration or nonuniformity in traffic paint vehicle solids. The procedures are applicable when traffic paint isā¦
🔬 Test Method Overview This test method describes the procedure for determining the relative tinting strength of white pigments by reflectance measurements of black tints. It is applicable only when comparing a test pigment with a reference standard of theā¦
🔬 Introduction and Scope This standard, designated ASTM D2739-97 (Reapproved 2017), defines a precise test method for evaluating the volume resistivity of cured, resin-based conductive adhesives. The measurement is performed directly on a thin adhesive layer as it would existā¦
📋 Overview and Scope ASTM D2741-95 (Reapproved 2005), formally titled “Standard Test Method for Susceptibility of Polyethylene Bottles to Soot Accumulation,” establishes a controlled laboratory procedure for evaluating the relative tendency of polyethylene bottles to accumulate soot particles. The standardā¦