Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📦 Scope and Material Composition This specification, designated D3320/D3320M −18 (Reapproved 2024), covers mineral-colloid-stabilized, emulsified coal-tar pitch suitable for use as a weather-protective and aliphatic-solvent resistant coating over bituminous pavements of airports, parking areas, and driveways. The emulsion must beā¦
📖 Scope and Instrument Overview ASTM D3321-19 (Reapproved 2023) defines a standard test method for the field determination of the approximate freezing point of aqueous engine coolants using a portable refractometer. This standard specifically covers ethylene glycol and propylene glycol-basedā¦
📐 Overview and Scope of ASTM D332-87 ASTM D332-87 (Reapproved 2020), “Standard Test Method for Relative Tinting Strength of White Pigments by Visual Observation,” defines a referee procedure for determining the relative tinting strength of white pigments. The method involvesā¦
🧪 Test Overview and Significance The ASTM D3316-06 (Reapproved 2022) standard defines a rigorous method for evaluating the corrosiveness of perchloroethylene to copper metal. This accelerated stability test is critical for industries such as dry-cleaning and metal degreasing, serving asā¦
📖 Scope and Significance ASTM D3319-23 provides a standardized laboratory procedure for estimating the polishing potential of coarse aggregates intended for use in bituminous pavements. By simulating the mechanical polishing action of vehicular traffic, this practice enables engineers to classifyā¦
The ASTM D3313-12 standard defines a manual test method for measuring the crushing resistance of individual carbon black pellets. The pellet hardness value derived from this test serves as a key indicator of mass strength, attrition potential, and subsequent dispersionā¦
ASTM D3314-02 (Reapproved 2021), titled “Standard Test Method for Rubber—Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices”, is a critical analytical procedure issued by ASTM Committee D11 on Rubber and Rubber-like Materials (Subcommittee D11.11). This standardā¦
ASTM D3311-22 is the definitive standard specification for the geometries and laying lengths of plastic fittings designed for drain, waste, and vent (DWV) applications. Published under the jurisdiction of ASTM Committee F17, it provides critical dimensional patterns for thermoplastic fittingsā¦
ASTM D3312-18 establishes a standardized test method for determining the percentage of volatile reactive monomer in uncatalyzed solventless varnishes. This test is critical for quality control and process specification, as the reactive monomer content directly impacts the viscosity and handlingā¦
📖 Scope, Designation, and Referenced Standards ASTM D331-11 (Reapproved 2019) provides the standard specification for 2-ethoxyethanol, also known as ethylene glycol monoethyl ether. This standard is under the jurisdiction of ASTM Committee D01 on Paint and Related Coatings, Materials, andā¦