Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D3296-24 defines the specification for FEP resin tube used in electrical, mechanical, chemical, and medical applications. The tubing is manufactured from virgin FEP material, including copolymers of tetrafluoroethylene and hexafluoropropylene or modified FEP resins with no more than 2%…
📐 Scope and Key Specifications ASTM D3299-24, approved for use by U.S. Department of Defense agencies, specifies requirements for filament-wound glass-fiber-reinforced thermoset resin tanks designed for above-ground vertical installation. These tanks are intended to contain aggressive chemicals at atmospheric pressure,…
ASTM D3295-20 establishes the standard specification for PTFE tubing, miniature beading, and spiral cut tubing. Manufactured from PTFE resin produced from dispersion (as defined in Specification D4895), these products are critical for high-performance applications requiring exceptional chemical resistance and thermal…
🧪 Standard Practice Overview ASTM D3291-22 establishes a definitive standard practice for assessing the compatibility of plasticizers in poly(vinyl chloride) (PVC) plastics when subjected to compressional stress. The primary objective of this practice is to rate the amount of plasticizer…
This article outlines the key requirements of ASTM D3294-22, a standardized specification for Polytetrafluoroethylene (PTFE) resin molded sheet and basic shapes. Issued under ASTM Committee D20, the standard governs materials, dimensions, workmanship, and physical properties for critical high-performance applications. 📐…
📖 Scope and General Requirements ASTM D329-07 (Reapproved 2021) defines the standard specification for Acetone (99.5 % grade), also known chemically as dimethyl ketone or 2-propanone. This specification is relied upon by the paint, coatings, and chemical manufacturing industries to…
📜 Scope and Significance of ASTM D3290-00 ASTM D3290-00 (Reapproved 2005) defines the specifications for bond and ledger papers intended for records requiring maximum or substantial life expectancy. The standard establishes that longevity is closely linked to the pH of…
🧪 Scope and Structure of D3288/D3288M−20 ASTM D3288/D3288M−20, developed by Committee D09 on Electrical and Electronic Insulating Materials (Subcommittee D09.12), provides a standardized protocol for testing liquid enamel coatings specifically designed for film-insulated magnet wire. The standard integrates seven distinct…
ASTM D3289-17 (Reapproved 2022) specifies the Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method). This method determines the density of semi-solid and solid asphalt materials by weighing in air and in water. The values…
📐 Apparatus and Specimen Geometry The Cobb test apparatus includes a metal ring with an inside diameter of 11.28 ± 0.02 cm (100 cm² area), 2.5 cm high, and about 0.6 cm thick. This ring is clamped to a base…