Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D3353 – 18 (Reapproved 2024) defines standard test methods for fibrous-insulated magnet wire. It covers fibers or fibrous-tape insulation served or wrapped helically over bare conductors or film-insulated substrates (D1676). These test methods are intended primarily for the evaluationā¦
🧪 Scope and Summary This test method, D3354‑21, provides quantitative information on the blocking load of plastic film using the parallel plate method. Blocking refers to unwanted adhesion between layers of film. The test measures the force required to separateā¦
📋 Overview and Applicability of D3352-15 ASTM D3352-15 provides a standard atomic absorption spectrophotometry (AAS) method for the determination of soluble strontium ion in brackish water, seawater, and brines. This test method is applicable for samples containing strontium concentrations rangingā¦
📜 Scope and Application ASTM D3350-24 establishes a cell classification system for identifying polyethylene plastic pipe and fittings materials. The specification focuses on material identification and does not provide design engineering data or application suitability. It covers both base materialsā¦
The ASTM D3351-93 standard establishes a test method for quantifying the number of gels in plastic film. Gels, defined as nodules of oxidised or high-molecular-weight material, are objectionable due to their impact on film appearance and printability. This method usesā¦
ASTM D3348-12 (Reapproved 2017) provides a standardized procedure for the rapid colorimetric determination of trace lead in unleaded gasoline. Designed specifically for field use by nontechnical personnel, this method leverages a chemical extraction reaction combined with a standard test kitā¦
ASTM D3349-21 provides a standardized method for measuring the light transmitted through films of ethylene polymer materials pigmented with carbon black. By calculating the absorption coefficient from this transmission data and film thickness, manufacturers can effectively evaluate the dispersion qualityā¦
📐 Scope and Significance of Delta Mooney Testing ASTM D3346-17 (Reapproved 2022) provides standardized empirical test methods for assessing the processability of non-pigmented emulsion styrene-butadiene rubbers (SBR) using the Mooney shearing disk viscometer. The Delta Mooney (ΔMooney) measurements obtained areā¦
📐 Overview and Significance This test method, designated D 3347 – 94, is standardized under ASTM Committee D-9 on Electrical and Electronic Insulating Materials. It is used to determine the flow rate and tap density of granular electrical grade magnesiumā¦
The ASTM D3343-22 standard provides an empirical method for estimating the hydrogen content (mass percent) of aviation fuels, including aviation gasolines and aircraft turbine/jet engine fuels such as Jet A, Jet A-1, Jet B, JP-4, JP-5, JP-7, and JP-8. Theā¦