Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
This specification, designated D1241-15, covers the quality and grading of materials used in the construction of subbase, base, and surface courses for pavements. Materials include sand-clay mixtures, gravel, stone or slag screenings, sand, and crusher-run coarse aggregate combined with soil…
📐 Overview and Terminology of ASTM D1238-23a ASTM D1238-23a describes the determination of the rate of extrusion of molten thermoplastic resins using an extrusion plastometer. This test method is fundamental for characterizing the flow properties of plastics, where the melt…
📐 Standard Scope and Test Significance This test method, designated D1239 – 22a, establishes a rapid empirical procedure for measuring the resistance of plastic films to extraction by chemicals. The fundamental metric derived is the weight loss of a film…
ASTM D123-23 is the definitive compilation of textile terminology, developed under the jurisdiction of ASTM Committee D13 on Textiles and directly managed by Subcommittee D13.92 on Terminology. This standard consolidates definitions specific to the textile industry, ensuring consistency across various…
📐 Scope and Application This test method covers the evaluation of the flammability of textile fabrics as they reach the consumer for apparel. It employs a 26-gauge hypodermic needle as the ignition source to classify apparel textiles and identify those…
The ASTM D1234-13 standard establishes the procedures for sampling and measuring the unstretched staple length of grease wool, pulled wool, mohair, and other animal fibers in staple form. This test method is an industry standard for acceptance testing of commercial…
This article provides an overview of ASTM D1227/D1227M – 13 (Reapproved 2024), which specifies requirements for emulsified asphalt coatings used for protective roofing applications. The standard covers two types of emulsions, classified by their composition and reinforcement. 🏗️ Product Classification…
📐 Scope and Significance of ASTM D1229-03 ASTM D1229-03 (Reapproved 2024) specifically evaluates the ability of vulcanized rubbers to recover from deformation after being compressed at room temperature and then exposed to low temperatures. This method is critical for rubber…
📊 Key Measured Properties and Standards Specular gloss is reported in gloss units (GU) based on a theoretical perfect mirror assigned a value of 384.4 GU. The practical working standard is a polished black glass surface with a refractive index…
ASTM D1224 – 92 (Reapproved 2006) establishes standard test methods for determining zinc and cadmium in paper and highly opaque pigments. The standard presents three distinct analytical pathways—Polarographic (Method A), Gravimetric and Volumetric (Method B), and Atomic Absorption (Method C)—enabling…