Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D1193-24 is the standard specification that defines the required characteristics for reagent water used in analytical measurement processes under the jurisdiction of ASTM International. The specification covers four distinct types of water (Types I, II, III, and IV) with…
📐 Scope and Significance of Standard D1194-94 The ASTM D1194-94 standard test method covers the estimation of the bearing capacity of soil in place by means of field loading tests. It is used as part of a procedure for soil…
ASTM D1188/D1188M -22 addresses the determination of bulk specific gravity for compacted asphalt mixtures that absorb water or possess open/interconnecting voids. Unlike methods for dense, non-absorptive specimens, this standard requires a paraffin coating to seal the sample, ensuring accurate volume…
ASTM D1190-97 establishes the material requirements and testing procedures for hot-applied elastic joint sealants used in portland cement and asphaltic concrete pavements. Governed under the fixed designation D 1190, this specification ensures sealants can repeatedly withstand thermal expansion and contraction…
📐 Scope and Significance of Test Methods ASTM D1185-98 (Reapproved 2017) provides standardized test methods for evaluating pallets and related structures used in materials handling and shipping. These test methods are designed to measure the relative resistance of pallets to…
📋 Overview and Scope ASTM D1186-01 provides standard test methods for nondestructive measurement of dry film thickness of nonmagnetic coatings on ferrous bases. It covers two methods: Test Method A using mechanical magnetic pull-off gages and Test Method B using…
🛡️ Scope and Classification of Asphalt-Base Emulsions This specification covers emulsified asphalt suitable for application in a relatively thick film as a protective coating for metal surfaces. It distinguishes between two service types based on their setting characteristics and environmental…
ASTM D1183-03 (Reapproved 2019) outlines standardized practices for assessing the resistance of adhesives to cyclic laboratory aging conditions. By exposing bonded specimens to fluctuating temperatures and humidity levels, this method helps evaluate the durability of adhesive joints under accelerated service-like…
This test method, designated ASTM D1184-98 (Reapproved 2020), covers the determination of comparative flexural properties of metal or wood adhesive bonded assemblies. Using standard shape specimens and defined conditions of pretreatment, temperature, relative humidity, and testing technique, the method is…
ASTM D1177-22, under the jurisdiction of Committee D15 on Engine Coolants and Related Fluids, establishes a standardized laboratory procedure for determining the freezing point of aqueous engine coolant solutions. This measurement is a primary indicator of a coolant’s freeze protection…