Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🧪 Test Methods for Accelerated Lightfastness ASTM D4303-10 defines four accelerated test methods to simulate the effects of long-term indoor illumination on artists’ materials. These methods are used to categorize the lightfastness of colorants. Test Method A involves exposure inā¦
📐 Specimen Preparation and Media Substrates ASTM D4300-23 provides two distinct methodologies to evaluate the fungal resistance of adhesive films. The approach chosen depends on the physical properties of the adhesive. For low-viscosity adhesives, the specimen is prepared by castingā¦
📐 Scope and Significance of D4301 Standard Test Method D4301-05 (Reapproved 2019), under the jurisdiction of ASTM Subcommittee D01.33 on Polymers and Resins, outlines a procedure for the determination of total chlorine in epoxy resins and glycidyl ethers. The valuesā¦
The ASTM D430-06 (Reapproved 2018) standard establishes testing procedures for estimating the resistance of soft rubber materials and rubber-fabric composites to dynamic fatigue. These test methods are critical for simulating the repetitive mechanical distortions encountered by rubber articles such asā¦
🧪 Overview and Intended Application of D4298-22 ASTM D4298-22 is formally designated as the Standard Guide for Intercomparing Permeation Tubes to Establish Traceability. Under the jurisdiction of Committee D22 on Air Quality (Subcommittee D22.01 on Quality Control), this standard addressesā¦
📋 Scope and Application of ASTM D43 / AASHTO M121 This specification, designated under ASTM D43/D43M (Reapproved 2024) and as AASHTO No. M121, covers the requirements for coal tar primer intended for use with coal tar pitch in roofing, dampproofing,ā¦
📋 Scope and Importance This practice, D4296-24a, covers procedures for sampling pitch at points of manufacture, storage, and delivery. The values stated in SI units are regarded as standard. Sampling is as important as testing; if sampling is improperly done,ā¦
📋 Scope and Prerequisites for Safe BPA Handling ASTM D4297-15 (Reapproved 2024) establishes standard procedures for safely sampling and handling bisphenol A (4,4′-isopropylidinediphenol) in both its solid forms and as a molten liquid at elevated temperatures. The primary goal ofā¦
⚛️ Principle and Applicability of D4294-24 The D4294-24 standard specifies the determination of total sulfur in single-phase petroleum and petroleum products using Energy Dispersive X-ray Fluorescence (EDXRF) spectrometry. This method is applicable to a wide range of materials, including dieselā¦
ASTM D4295-89 (Reapproved 2021) establishes a comprehensive classification system for zinc oxide commercially used as a rubber compounding material. The standard distinguishes zinc oxides by their production process and details their typical chemical and physical characteristics as well as theirā¦