Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D4293-22 establishes the minimum requirements for delivered phosphate ester-based fluids used as turbine lubricants and steam turbine electro-hydraulic control (EHC) fluids. Developed by Subcommittee D02.C0.01, this specification ensures that fluids meet the rigorous demands of systems specifically designed orā¦
📐 Scope and Summary of the Test Method ASTM D4291‑21 provides a definitive procedure for determining trace levels of ethylene glycol as a contaminant in used engine oil. The method is specifically designed to quantitate contamination in the critical rangeā¦
📖 Standard Overview and Scope ASTM D4292-23 defines a standardized test method for determining the vibrated bulk density (VBD) of calcined petroleum coke. This measurement serves as a critical indicator of coke porosity, directly influencing its suitability for pitch-bonded carbonā¦
📐 Specimen Configurations and Test Methods ASTM D429-14 (Reapproved 2023) defines eight distinct test geometries for evaluating the static adhesional strength of rubber to rigid substrates. Under the jurisdiction of Subcommittee D11.25, these methods cover standard shear, peel, tensile, andā¦
The ASTM D4290-20 standard defines a laboratory procedure for evaluating the leakage tendencies of automotive wheel bearing greases under accelerated conditions. This test method is essential for screening greases based on their high-temperature leakage characteristics and provides reproducible results forā¦
📐 Pigment Classification and Types ASTM D4288-02 (Reapproved 2019) provides the standard specification for calcium borosilicate composite pigments. The standard defines two principal types that differ in chemical composition, with Type I further subdivided into two classes based on theirā¦
📐 Specimen Preparation and Test Conditions ASTM D4289-24a evaluates the compatibility of lubricating greases and fluids with elastomeric materials. Test coupons are cut from standard vulcanized elastomer sheets prepared in accordance with Practice D3182. For rubber products not available inā¦
📜 Purpose and Scope of Standard D4286 The ASTM D4286-08 (Reapproved 2021) standard provides a systematic criteria guide and procedural method for evaluating the qualifications of coating contractors. Specifically designed for light-water nuclear power plants, this practice focuses on theā¦
📐 Scope and Applicability This test method, designated ASTM D4287-00, determines the viscosity of paints, varnishes, and related products at a constant shear rate of 12,000 s⁻¹. It is applicable to both Newtonian and non-Newtonian fluids. However, paints that dryā¦
📐 Scope and Terminology This standard, designated D4284–12 (Reapproved 2017), specifies a test method for determining the pore volume distributions of catalysts and catalyst carriers using mercury intrusion porosimetry. The applicable range of apparent pore entrance diameters is typically betweenā¦