Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
This standard, designated ASTM D4335-18, provides a standardized practice for evaluating the force required to remove critical components—specifically the hood and actuator—from a mechanical pump dispenser. This test method is essential for establishing performance specifications, conducting quality control assessments, and…
🌡️ Standard and Special Conditioning Atmospheres This practice defines standard and special conditioning and testing atmospheres to simulate the field conditions containers, packages, or packaging components may encounter. The conditioning process ensures the test specimen approaches or reaches equilibrium with…
🧪 Test Specimen and Conditioning Requirements This standard specifies testing of mechanical pump dispenser components for compatibility with consumer products. Test specimens must consist of at least three individual components for each part tested, along with three control specimens per…
ASTM D4329-21 specifies the standard practice for fluorescent UV lamp exposure of plastics. Operating under the framework of Practices G151 and G154, it defines precise conditions for exposing plastics to UV radiation, moisture, and heat to simulate outdoor degradation in…
D4330-24, issued under the fixed designation ASTM D4330, provides a standardized yet flexible framework for evaluating the performance of fiberglass boat polishes and waxes. This practice focuses on key performance metrics including ease of application, cleaning efficiency, gloss, and overall…
📐 Scope and Applicability This standard practice, D4328-18, provides a method for calculating the supersaturation of barium sulfate (BaSO₄), strontium sulfate (SrSO₄), and calcium sulfate dihydrate (gypsum, CaSO₄·2H₂O) in brackish waters, seawater, and industrial brines. These calculations are essential for…
📐 Sample Preparation and Ashing Procedure The test method requires that the coal sample be ashed under standard conditions and ignited to constant mass. For previously ashed materials, they are also ignited to constant mass under standard conditions. The resulting…
ASTM D4327-17—Standard Test Method for Anions in Water by Suppressed Ion Chromatography—provides a standardized procedure for the sequential determination of common inorganic anions in drinking and wastewater matrices. This method uses suppressed ion chromatography to achieve the sensitivity and selectivity…
📐 Scope and Applicability ASTM D4323-21 defines a standard test method for the automatic continuous determination of hydrogen sulfide (H₂S) in the atmosphere or in gaseous samples. The method is highly sensitive, operating within a validated range of 1 part…
📐 Scope and Test Methods Overview ASTM D4325-20 establishes standard test methods for evaluating nonmetallic semi-conducting and electrically insulating rubber tapes, specifically designed for splicing, terminating, and sheath repair of electrical wire and cable. The standard provides a comprehensive framework…