Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📐 Scope and Significance As per ASTM D4344-84 (Reapproved 1998), the Smith-McIntyre grab sampler is used for collecting benthic macroinvertebrates from sand, gravel, mud, and clay substrates in estuarine, marine, and large river environments. This practice provides procedures for obtaining…
📐 Scope and Apparatus Overview This standard practice (ASTM D4342-84) covers procedures for obtaining qualitative or quantitative samples of benthic macroinvertebrates using the Ponar grab sampler. The device is adaptable to a wide range of aquatic habitats, including freshwater lakes,…
📐 Overview and Significance ASTM D4340-19 establishes a standardized laboratory screening procedure for evaluating the effectiveness of engine coolants in combating the corrosion of cast aluminum alloys. Specifically designed to simulate the heat-rejecting conditions present in modern aluminum cylinder head…
📐 Specimen Preparation and Scope ASTM D4341-03 defines the method for evaluating the creep behavior of intact cylindrical hard rock core specimens under uniaxial compression. “Hard rock” is specifically defined as material with a maximum failure strain of less than…
🧪 Scope and Significance of D4339 ASTM D4339-01 (Reapproved 2018) defines a standard procedure for evaluating the odor of adhesives. Issued under the fixed designation D4339, it was developed to replace Federal Standard 175A, Method 4051. This test method provides…
⚙️ Test Method Overview and Significance This standard test method, designated ASTM D 434-95, covers the determination of the resistance to slippage of filling yarns over warp yarns, or warp yarns over filling yarns, using a standard seam. It is…
📐 Scope and Significance of D4337-89 The ASTM D4337-89 (Reapproved 2017) standard specifies test methods for analyzing linear detergent alkylates, which are linear alkylbenzenes primarily used in surfactant production for detergents. These tests evaluate properties that characterize the alkylate’s suitability…
📐 Overview and Scope of ASTM D4338 ASTM D4338-97 (Reapproved 2021) provides a standard test method for assessing the flexibility of an adhesive film bonded to a flexible substrate, commonly known as the mandrel bend test. This method is widely…
📏 Scope and Significance of D4336–18 ASTM D4336–18, “Standard Practice for Determination of the Output Per Stroke of a Mechanical Pump Dispenser,” defines a standardized methodology for measuring the mean quantity-by-weight of liquids dispensed by mechanical pump dispensers on each…
📐 Scope and Significance of D4334-18 ASTM D4334-18, officially titled “Standard Practice for Determination of the Dip Tube Retention of a Mechanical Pump Dispenser,” provides a standardized method for measuring the axial force required to separate the dip tube from…